Peraqua 7301269 Manual page 43

UNIT=MM
7301269
7301270
7301271
7301272
2.2.2. Heat pump installation.
The frame must be fixed by bolts (M10) to concrete foundation or brackets. The concrete foundation

must be solid; the bracket must be strong enough and anti-rust treated;
The heat pump needs a water pump (Supplied by the user). The recommended pump

specification-flux: refer to Technical Parameter, Max. lift ≥10m
When the heat pump is running, there will be condensation water discharged from the bottom, please

pay attention to it.
2.2.3. Wiring & protecting devices and cable specification
Connect to appropriate power supply, the voltage should comply with the rated voltage of the

products.
Well earth the heat pump.

Wiring must be connected by a professional technician according to the circuit diagram.

Set breaker or fuse according to the local code (leakage operating current ≤ 30mA).

The layout of power cable and signal cable should be orderly and not affecting each other.

A B
685 441
685 463
685 463
685 463
※ Above data is subject to modification without notice.
For installers and professionals
C D E
753 710 688
775 710 688
775 710 688
775 710 688
- 13 -
F G H
280 75.5 668
350 75.5 668
390 75.5 668
460 75.5 743