Peraqua 7301269 Manual page 38

2.2.1 Power On: Press
2.2.2 Adjust Set Temperature: When screen is unlocked, press
temperature.
2.2.3 Mode Selection: Press
a. Auto : adjustable temperature range 12~40℃
b. Heating : adjustable temperature range 18~40℃
c. Cooling : adjustable temperature range 12~30℃
2.2.4 Turbo/Smart/Silence mode selection:
a. Smart mode as default will be activated when heat pump is on, and screen shows
b. Press to enter Turbo mode, and screen shows
screen shows . Prees
Attention:
a. When use the Turbo mode, you should select it every time, the machine will not automatically enter the
Turbo mode.
b. During the Turbo mode, when the machine reaches the set temperature, it will automatically return to the
smart mode.
2.2.5 Defrosting
a. Auto Defrosting: When heat pump is defrosting,
flashing.
b. Compulsory Defrosting: When heat pump is heating, press
compulsory defrosting, and
(Note: Compulsory defrosting intervals should be more than 30 minutes and the compressor should run for
more than 10 minutes.)
2.2.6 Temperature display conversion between ℃ and ℉:
Press " " and "
2.2.7 Wifi setting
Please kindly check the last page.
for 3 seconds to light up screen, then press
to select mode.
again, the screen shows
will be flashing. After defrosting,
" together for 5 seconds to switch between ℃ and ℉.
or
，then press
and return to Smart mode.
will be flashing. After defrosting,
and
- 8 -
to power on heat pump.
to display or adjust the set
.
to enter Silence mode, the
together for 5 seconds to start
will stop flashing.
For users
will stop