Optional/Mattress Height Adjustment - Mocka Eclipse Assembly Instructions

Eclipse Cot
Assembly Instructions
5
A
1
A
3
1
A
A
OPTIONAL/ MATTRESS HEIGHT ADJUSTMENT (please keep these
instructions handy for future reference)
To adjust mattress base settings, remove small plastic plugs. This will
require a small amount of force, please note these are not screws and
cannot be screwed out. You will need a screwdriver/ that fits into the
centre hole and possibly a hammer, or similar, to gently tap the end
until the plug pops out.
Repeat steps 2, 3 and 4 by removing the side panel and moving the
base to corresponding holes. Securely attach again in the adjusted
4
position.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558