Page 1
ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #SAK180-R WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. User weight limit 275 lbs. WARNING Ladders allow young children to climb onto the trampoline. Trampolines are not for children under 6 years of age.
BEFORE YOU BEGIN Thanks for choosing Skywalker Trampolines! We’re just as excited as you are to help your family live an active (but most importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. To make things easier for you, we’ve listed important information that you (and your little outdoor adventurers) need to...
PART LIST Key No. Qty. Description Curved Ladder Rails Ladder Step M6x40mm Bolt M6x33mm Bolt M6 Washer M6 Nut Lower Frame Base Toss game Score Tags Sandbag Wind stake Screw Driver Wrench ORDERING REPLACEMENT PARTS We get it, sometimes things happen, but the fun shouldn’t stop just because you need a new bolt or screw. To order replacement parts, check out our website www.skywalkertrampolines.com or call our toll-free Customer Care Hotline at 1-866-603-Jump (5867), Monday - Thursday 8 a.m.
PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts. The numbers in the squares to the left (key numbers) will help you identify the parts during assembly. Curved Ladder Ladder Step (x2) M6x40mm Bolt (x4) Rails (x2)
ASSEMBLY - Ladder STEP 1 Lay the two curved ladder rails (1) on a clear area. Place one of the ladder steps (2) onto the bottom of each ladder rail. Slide the step up until the top bolt holes of the rail and step line up. (Make sure the checkered pattern of the step is facing up.) Curved Ladder Ladder Step (x1)
Page 8
ASSEMBLY - Ladder STEP 3 Repeat steps 1 & 2 to assemble the second ladder step. M6x40mm Bolt Ladder Step (x1) M6 Nut (x2) (x2) STEP 4 With the assembled top portion of the ladder, place the lower frame base (7) onto the ladder rails making sure to align the bolt holes.
Page 9
ASSEMBLY - Toss game STEP 5 Assure that all bolts and end caps are tight and secure. To place the ladder on the trampoline, simply lift the spring pad and hook the top of the ladder to the trampoline frame. The assembly of your trampoline accessory ladder is now complete.
Page 10
ASSEMBLY - Wind stake STEP 7 To place the wind stakes (11), set one over the top of the trampoline leg where it sits on the ground. The wind stake should straddle the trampoline leg with the points facing down. Push or pound the wind stake firmly into the ground.
LIMITED WARRANTY Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail purchaser from the date of original purchase.
Page 12
NOTE: Skywalker Holdings, LLC is not responsible or liable for indirect, special or consequential damaages arising out of or in connection with the use or performance of the product or other damages with respect to any econmic loss, loss of property, loss of revenue or profits, loss of enjoyment or use, cost of removal, installation or other consequential damages.
Need help?
Do you have a question about the SAK180-R and is the answer not in the manual?
Questions and answers