Adjustment of damper settings.
Each damper has an adjuster ring that can be used to
stiffen or soften the suspension, depending on the
vehicle load.
Metropolis Active and Allure
+
1
2
3
- Place the vehicle on the central stand.
- Turn the adjustment ring to change the damper
preload.
Adjusting the suspension
Notch 1
Notch 2
Notch 3
Notch 4
To guarantee your comfort and safety,
always adjust the damper preload in line
with the vehicle load.
Perform the same setting for the 2
dampers.
38/53
Metropolis GT and SW
-
-
4
- Place the vehicle on the central stand.
- Turn the adjustment ring to change the damper
preload.
- Measure the distance between the adjustment ring
and the body of shock absorber (A).
A = 8_mm
A = 13_mm
A = 27_mm
< 80 kg
A = 28_mm
80 to 100 kg
To guarantee your comfort and safety,
100 to 120 kg
always adjust the damper preload in line
> 120 kg
with the vehicle load.
Perform the same setting for the 2
dampers.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
+
A
Adjusting the suspension
< 80 kg
80 to 100 kg
100 to 120 kg
> 120 kg
Damping force adjustment
This setting affects the compression and rebound of the
shock absorbers.
Turn the adjustment wheel to increase or decrease the
damping force.
Standard position:
Turn the adjustment wheel clockwise to set it to the
hardest position, then loosen it by 9 notches.
Perform the same setting for the 2
dampers.
-
+