PEUGEOT METROPOLIS ABS 2021 User Manual page 20

Indicator
Traction control indicator
light (Traction Control
System)
Engine lubrication
a
warning light
Engine temperature
warning light
a. Depending on equipment.
18/53
Status Cause
Off The system is functioning correctly
but is inactive.
Fast flashing The system is functioning correctly
and is active (Low grip conditions).
fixed The system is deactivated and does
not operate if grip is lost (Mode:
Deactivated).
fixed If the warning light is steadily lit with
mode 1 or 2 selected, this means
that the system is faulty.
fixed When the engine is running, the
warning light is indicative of a failure
of the engine lubrication system.
fixed A high temperature reading is
indicated by a red warning light.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
Actions / Observations
The system is automatically activated each time the vehicle starts up.
When the grip level is reached, you should reduce your speed to
ensure your safety on the road.
To guarantee maximum grip, make sure the traction-control
function is on (1 mode, 2 mode).
You are advised to have the vehicle checked by an authorised dealer.
It is imperative to stop the vehicle under the best possible
conditions of safety and to turn off the engine.
You are advised to have the vehicle checked by an authorised
dealer.
When the oil pressure warning light comes on while the engine
is running, a warning message appears in the digital display at
regular intervals.
You are advised to switch of the engine and check the coolant
level after it has cooled down. If the level is correct, have the
vehicle checked by an approved dealer.