Panel Lock; Wipe Protection; Basic Settings - Thermador Masterpiece Series Use And Care Manual

Press on the printed words for the cooking zone you
1.
want to select.
Press POWER BOOST.
2.
goes out.
a
The cooking zone switches to power level ⁠ .
a
Notes
In certain circumstances, this function may switch off
¡
automatically in order to protect the electronic elements
inside the cooktop.
If you have set a power level before activating the func-
¡
tion, this power level is used automatically after the
function has been deactivated.
6.7 Panel lock
You can use the panel lock to prevent the cooktop from
being turned on accidentally.
CAUTION
The panel lock may be turned on and off accidentally due
to:
water spilled during cleaning
▶
food that has overflowed
▶
objects being placed on the panel lock touch key.
▶
Activating the panel lock
Requirement: The cooktop is turned off.
Touch LOCK for 4 seconds.
▶
The indicator over LOCK lights up for 10 seconds.
a
The control panel is locked.
a
Deactivating the panel lock
You can turn off the wipe protection manually.
Touch LOCK for 4 seconds.
▶
The control panel is unlocked.
a
Automatic panel lock
This function automatically activates the panel lock when
you switch off the cooktop.
The automatic panel lock can be activated in the basic set-
tings → Page 13 .
6.8 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
Touch LOCK.
▶
The indicator above LOCK lights up.
a
The control panel is locked for 35 seconds.
a
After 30 seconds a beep indicates that the wipe protec-
a
tion is about to turn off.
Deactivating wipe protection
Touch LOCK.
▶
The indicator above LOCK goes out.
a
6.9 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function

Panel lock

– Manual 1
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
1
on.
Duration of timer end signal
– 10 seconds
– 30 seconds
– 1 minute
⁠ ⁠ Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
– 1.000 W minimum power
– 1.500 W
...
– 3.000 W recommended for 13 A
. – 3.500 W recommended for 16 A
– 4.000 W
. – 4.500 W recommended for 20 A
...
or . – Maximum power of the cooktop
Time for setting a cooking zone after selec-
tion
– Unlimited: The last selected cooking zone
remains selected. You can adjust the settings
without having to select it again.
– Limited: You can adjust the settings for
the selected cooking zone within 10 seconds.
After 10 seconds you have to select the
cooking zone again.
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Restore factory settings
– Off 1
– Restore appliance to factory settings
1 Factory setting (may vary according to model)
2 The cooktop's maximum power output is shown on the
rating plate
Changing the basic settings
Requirement: The cooktop is turned off.
Turn on the cooktop.
1.
Within the next 10 seconds, press TIMER for about
2.
4 seconds.
Operation en-us
1
1 2
,
2
13