TH2plus System Settings
Open MENU – CONFIGURATION – SYSTEM in
▪
the PC software.
Select the PHONERSET / REMOTE LIGHT
▪
page under SYSTEM SETTINGS on the left.
▪
Enable the PhonerSet feature via ACTIVATE
PHONERSET.
Select the LAN INTERFACE of the device to
▪
which the PhonerSet phones are
connected.
Enter the local TCP/IP PORT to which the
▪
PhonerSet phones connect. (default:
10300)
Each PhonerSet phone establishes an audio
▪
data stream to the device. Enter a unique
AUDIO PORT for each PhonerSet phone.
(default: 5400, 5402)
9