Table of Contents
Advertisement
THipPro Operation Settings (2)
FADER 1/ 2: Up to two buttons for ON AIR
▪
are available in the App when assigning
individual audio lines to Fader 1 and 2. Up to
four ON AIR buttons are available when
assigning the audio lines of the studio. The
NOT USED setting hides the button.
▪
HOLD: An individual Hold signal can be
assigned to each PhonerSet. The Hold
signals of the studios and PC clients are
available.
CONFERENCE: Check this box to set several
▪
callers to PRETALK or ON AIR at the same
time in the PhonerSet App. All participants
can then talk to each other.
LABEL: Configure the text written on the
▪
Pretalk button of the LAN Client PC
software if the PhonerSet is used as Pretalk
interface.
18
Advertisement
Table of Contents
