Device Menu; Miscellaneous - Hegel H120 User Manual

Device Menu

Navigation
To enter the device menu, turn the amplifier
on and press and hold the PLAY(2) button
for 5 seconds. To navigate the menu, use
the PREV(1) and NEXT(3) buttons. To select
a sub-menu or feature, press the "PLAY(2)
button. To exit the menu, navigate to "Exit"
and press PLAY(2), or turn one of the ampli-
fier's knobs.
NOTE: Some menu features require con-
nection to the internet to work properly.
See Network Setup
Menu navigation
COMPUTER
PREV PLAY NEXT
PREV - Up
PLAY - Select
NEXT - Down
DAC+ ECO DISP
PREV PLAY NEXT
IN+ STOP VOL+
IN- MUTE VOL-
16
Info
Information about the Hardware Version of
your product and the Software Version cur-
rently running.
Network
Information about the Network Device
Name and the IP Address of your product.
Update
Check for and download the newest soft-
ware for your product.
Sleep
By default, the amplifier will automatically
switch itself off after 15 minutes with-
out music, or with very low signal on the
speaker outputs. Sleep / Auto off can be
disabled in this menu.
Reset
Here you can reset the product to the de-
fault factory settings. This includes volume
and IP settings. The reset will not affect any
software updates you have installed.
HT
Most inputs can be configured to act as a
Home Theater input. This will set the input
volume at a fixed high volume level.
NOTE: The Hegel device menu
can be updated with new fea-
tures and options.
For an up to date and in-depth
description of the menu and its
features, please visit
support.hegel.com

Miscellaneous

Using the USB Connection
When you connect your Hegel device to a
computer with a USB cable (not included),
the Hegel will automatically install itself as
a USB soundcard on all newer versions of
Windows, macOS, and most Linux operat-
ing systems.
NOTE: The first time you connect your
computer to your Hegel device, connect the
computer to the internet and close all media
players.
Troubleshooting with macOS
The Hegel device is connected, but there is
no sound: Go to System Preferences –
Sound – Output and select "TE7022 Audio
w/ SPDIF" as the Output Device.
Connecting a subwoofer
The most common way to connect a
subwoofer is from the variable line output
on your Hegel amplifier. If your subwoofer
is equipped with "high level" speaker wire
terminals you can also use this. Many sub-
woofer manufacturers recommend this type
of connection if it is available.
Please consult your subwoofer manual for
detailed instructions on how to connect and
configure your subwoofer for the best audio
result.
Power
All electrical components should be turned
off or in standby when not in use. This due
to safety, because all electrical components
can fail, and it is good for the environment.
Leaving your product on all the time could
also shorten the life expectancy of the
product.
That being said, our products sound even
better when they are warmed up, typically
after about 15 minutes of listening at a
moderate volume.
Connecting your TV
The best way to connect your TV is by us-
ing one of the optical inputs. If there is no
sound, try changing the sound output in the
TV's settings menu. The setting should be
changed to PCM or stereo. Please consult
your TV's manual for detailed instructions.
17