Baxi JSGNW Installation And Support Manual page 15

Location of the hosting bolt
Connecting the piping
Wrap all the pipes, the drainage pipe and the electrical cables from the top to the bottom.
Wrap the pipes with tape along the route and secure them to the wall with the special clips.
These steps only concern cases where the outdoor unit is installed below the indoor one.
- lf you want to add additional water drainage, keep
at a certain distance from the ground and from the
surface of the water. Do not immerse the pipe(s) in
the water.
- Secure the pipe(s) to the wall so they are not
affected by the wind.
Wrap the pipes and electrical cables well from
-
bottom to top.
- Wrap the pipes and shape them, especially around
corners to prevent water from infiltrating the home.
- Use clamps or other accessories to secure the
pipes to the wall.
MODEL
LSGT40-2M
LSGT50-2M
LSGT60-3M
LSGT70-3M
LSGT100-4M
LSGT125-5M
14
DIMENSIONS A
800x545x315 545
800x545x315 545
834x655x328 540
834x655x328 540
985x805x395 675
985x805x395 675
B
315
315
335
335
410
410