Control Mode; Limitation - Heatcom HC70 Series Manual

turned on. Press OK and set the function to on. Confirm with OK.

Control mode

Set the type of regular used system. There are 3 options:
Floor reg. : The thermostat regulates floor temperature only. A floor sensor must be
connected.
Room reg. : The thermostat regulates room temperature only.
Room/limit: The thermostat regulates room temperature with min. and max. limits for floor
temperature. A floor sensor must be connected.
Press OK and select the required heating system.

Limitation

Allows you to set the temperature range within which the thermostat can be set. It is then
only possible to set a temperature in this range in auto, comfort and manual mode.
Press OK to highlight Min temperature. Use the up or down button to select the minimum
permissible temperature. Press OK and select the maximum permissible temperature.
Confirm the settings with OK.
Temperature Max 20~40℃, Default 35℃; Min 5~20℃, Default 5℃.
Floor protection Max 15~27℃, Default 27℃; Floor protection Min 5~10℃, Default 5℃.
Floor protection Max/Min only works at Room/limit mode.
6