Calibration; Adaptive Function - Heatcom HC70 Series Manual

Time
2 events 6:30
1：
7 days
W ake
Time
2 events 6:30
Time and day
Press OK and set the actual time in hours and minutes. The day will then be displayed.
Set the day and confirm with OK.

Calibration

If the actual measured temperature does not corresponding to the thermostat value, you
can adjust the thermostat by offsetting the temperature. Press OK and enter the value of
the measured temperature. Confirm with OK.
Range -4℃～4℃, Default 0℃.

Adaptive function

It is ensure that the required temperature has already been reached when you get up in
the morning or come home from work. After just a few days, according to your habit, the
adaptive function will have automatically entered CO mode while the heating must be
Temp. Time Temp.
22℃ 23:00 18℃
Temp. Time Temp.
22℃ 23:00 18℃
5