Operating Instructions; Temperature Controls - GE Built In 36 Single Door Refrigerators and 36 Single Door Freezers Owner's Manual

Built-in 36" single door refrigerators and 36" single door freezers
Table of Contents

Advertisement

Set the
WHEN YOU FIRST TURN THE
REFRIGERATOR/FREEZER ON,
temperature
SET THE CONTROL AT 5.
control
9 is the coldest setting, 1 is the warmest.
For colder or warmer temperatures, adjust
the control one number at a time.
IMPORTANT: When first setting the control,
or adjusting it, allow 24 hours for the
refrigerator/freezer to get cold.
NOTE: Turning the control to the OFF
position stops cooling in the refrigerator/
freezer, but does not shut off power to
the refrigerator/freezer.
How to test
Use the milk test for the refrigerator. Place a
temperatures
container of milk on the top shelf. Check it a
day later. If the milk is too warm or too cold,
adjust the temperature control.
8

Operating Instructions

Refrigerator/Freezer
Use the ice cream test for the freezer. Place
a container of ice cream in the center of the
freezer. Check it after a day. If it's too hard
or too soft, adjust the temperature control.
Always allow 24 hours for the refrigerator/
freezer to reach the temperature you set.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monogram series

Table of Contents