❸ Turning On The Projector - NEC PE506UL User Manual

❸ Turning on the Projector
1. Remove the lens cap.
(For PE506UL only )
Press and hold both ends of the lens cap and pull it toward
you.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will blink and the projector will
become ready to use.
TIP:
• When the message "PIN code" is displayed, it means that the
[SECURITY] feature is turned on.
(→ page 51)
After you turn on your projector, ensure that the computer
or video source is turned on.
2. Projecting an Image (Basic Operation)
Standby
Blinking orange light
(→ page 88)
12
Blinking Power On
Blinking blue Steady blue
light light