Table of Contents
Advertisement
Chapter 2 Electrical Installation
LINE
N
A
B
LOAD
VII. Dual-Phase System
2.6
R
P
ELAYS AND
ROTECTION
NOTE: T
HIS SECTION IS APPLICABLE ONLY IF THE
The EPM3000P allows the user to access a variety of relay options through the programming mode. The relay option
package consists of two relays, which can be dedicated to alarm or communication (or both).
TIME DELAY: Sets off the alarm, alerting the user that an out-of-limits condition occurred during the defined time
limit. The time delay can be programmed for any desirable duration.
If the relays are dedicated to communication, there are two different modes:
Lock ON
Relay will not be affected by any alarm condition.
Lock OFF
Relay will not be affected by any alarm condition.
If the relays are used for communication and alarm, there are four different modes:
Lock ON
Relay stays on regardless of any alarm condition.
Lock OFF
Relay stays off regardless of any alarm condition.
Free ON
Relay turns on unless other conditions force it off.
Free OFF
Relay turns off unless other conditions force it on.
BACK VIEW
8
7
6
5
4
3
2
L2
+
POWER
1
L1
-
DUAL-PHASE
WITH CTs AND Direct Voltage
-NL R
O
ELAY
PTION WAS ORDERED
GE Industrial Systems
9
10
11
12
13
PORT
.
8
Advertisement
Table of Contents
