Further System Specifications; Figure 6-12: Communication Channels; Figure 6-13: Networking; Figure 6-14: Gsm / Gprs Modem - GE Kelman MINITRANS User Manual

6.1.4

Further system specifications

6.1.4.1 Communications channels
The product has two serial communications channels. For example, default configuration
details are shown in Figure 6—12, such as the interface, protocol, baud rate, modbus
address and parity error-checking format:
ChA RTU 1 RS232
19200 0
ChB: ASC 1 GSMGPRS
57600 0
Figure 6—12: Communication channels
6.1.4.2 Networking
If Ethernet is enabled and a RJ-45 connection made, relevant network details are shown.
For security reasons, all network details are hidden by default as shown in Figure 6—13,
but these can be software enabled.
IP: XXX.XXX.XXX.XXX
SUB: XXX.XXX.XXX.XXX
GW: XXX.XXX.XXX.XXX
TCP: 502
Figure 6—13: Networking
6.1.4.3 Other system details
Additional information notices reflect the configuration of the product. For example, if a
GSM/GPRS modem is fitted, additional page(s) as shown in Figure 6—14 reflect the
communications provider, signal strength and any problems.
vodafone UK
MAJOR GPRS PROBLEM
Figure 6—14: GSM / GPRS modem
Notes:
a) Actual product values depend on the installation at any moment in time.
b) Actual parameter format can vary e.g. O
c) See Section 6.2 for a list of error codes that can occur on the LCD display panel
and their meaning.
d) System Failure mode limits functionality and the availability of certain screens.
Contact the Customer Service Centre.
MA-006- MINITRANS User Guide - Rev 2.1
or Oxygen.
2
13-Oct-15 Page 16 of 25