9 - Use protective equipment should be properly repaired or replaced by an authorized service centre unless Use safety glasses. Use face or dust mask if working otherwise indicated in this instruction manual. operations create dust. Cut off saw KU760...
(FI) with a maximum triggering current of 30 mA. Use only an extension cable that is approved for outdoor use. 7. Always lead the cable to the rear away from the machine. 8. Use the machine only for dry cutting. Cut off saw KU760...
Page 5
When cutting, apply only light pressure to the handle. 23. Observe the dimensions of the cutting disc. The hole diameter must fit on the tool spindle or the adapter without play. Cut off saw KU760...
355mm washer (19). Remove slices (5). Disc bore 25.4mm Installation of slices If necessary, clean the relevant parts thoroughly before Machine weight 16kg installation. Protection class Install the new slice on the spindle (17). The labeled Cut off saw KU760...
During cutting, the slices become very hot; they are not touchable until they are cooled down. Choose the appropriate slice according to the Cut off saw KU760...