Avalon Instruments StarGo2 Pro User Manual page 26

6. After the connection, the Connect indicators goes green (Figure 3.14). The RA and DEC fields
will be populated with the actual telescope position and a simple telescope virtual keypad will
appear with a new dropdown menu to select the telescope movement speed. The frame
below the virtual keypad will be filled with all the telescope operation information.
7. If the telescope is still parked, due to CdC not embedding the Unpark command, it is necessary
to enter the INDI window by clicking the INDI gui (see Figure 3.14) button. The windows that
will open (See Figure 3.15), which is the same EKOS windows but with another graphical
aspect, will allow to execute this and other functions non available in CdC. To Unpark open the
StarGO2 Telescope panel, clicking the button in the red oval. This panel is equivalent to the
EKOS panel in Figure 5e. All other tabs are equivalent to those of step 3 in the previous KStars
Method 1 description. All the operation reported there can be performed even under CdC
environment, supplying the missing commands in the main CdC interface.
26
Figure 3.14 – StarGO2 connected