Table of Contents
Advertisement
Annunciations & Alerts
misCellAneOus messAge ADvisOries (COnt.)
Message
VNV – Unavailable. Excessive
crosstrack error.
VNV – Unavailable. Parallel course
selected.
NO WGS84 WPT – Non WGS 84
waypoint for navigation -[xxxx]
TRAFFIC FAIL – Traffic device has
failed.
STRMSCP FAIL – Stormscope has
failed.
FAILED PATH – A data path has
failed.
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
SVS – SVS DISABLED: Out of
available terrain region.
SVS – SVS DISABLED: Terrain DB
resolution too low.
SCHEDULER [#] – <message>.
74
Garmin G1000 Cockpit Reference Guide for the DA42-L360
Comments
The current crosstrack exceeds the limit,
causing vertical deviation to go invalid.
A parallel course has been selected, causing
the vertical deviation to go invalid.
The position of the selected waypoint [xxxx]
is not calculated based on the WGS84 map
reference datum and may be positioned in
error as displayed. Do not use GPS to navigate
to the selected non-WGS84 waypoint.
The G1000 is no longer receiving data from
the traffic system. The traffic device should be
serviced.
Stormscope has failed. The G1000 system
should be serviced.
A data path connected to the GDU or the GIA
63/W has failed.
The GDU's internal model cannot determine
the exact magnetic variance for geographic
locations near the magnetic poles. Displayed
magnetic course angles may differ from the
actual magnetic heading by more than 2°.
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second
or better) is not currently installed.
Message criteria entered by the user.
190-01062-01 Rev. A
Advertisement
Table of Contents
