Garmin DA42-L360 Cockpit Reference Manual page 89

misCellAneOus messAge ADvisOries (COnt.)
Message
ARSPC NEAR – Airspace near – less
than 2 nm.
APR INACTV – Approach is not
active.
SLCT FREQ – Select appropriate
frequency for approach.
SLCT NAV – Select NAV on CDI for
approach.
PTK FAIL – Parallel track unavailable:
bad geometry.
PTK FAIL – Parallel track unavailable:
invalid leg type.
PTK FAIL – Parallel track unavailable:
past IAF.
UNABLE V WPT – Can't reach
current vertical waypoint.
VNV – Unavailable. Unsupported
leg type in flight plan.
VNV – Unavailable. Excessive track
angle error.
190-01062-01 Rev. A
Comments
Special use airspace is within 2 nm of the
aircraft position.
The system notifies the pilot that the loaded
approach is not active. Activate approach
when required.
The system notifies the pilot to load the
approach frequency for the appropriate NAV
receiver. Select the correct frequency for the
approach.
The system notifies the pilot to set the CDI to
the correct NAV receiver. Set the CDI to the
correct NAV receiver.
Bad parallel track geometry.
Invalid leg type for parallel offset.
IAF waypoint for parallel offset has been
passed.
The current vertical waypoint can not be
reached within the maximum flight path angle
and vertical speed constraints. The system
automatically transitions to the next vertical
waypoint.
The lateral flight plan contains a procedure
turn, vector, or other unsupported leg type
prior to the active vertical waypoint. This
prevents vertical guidance to the active vertical
waypoint.
The current track angle error exceeds the limit,
causing the vertical deviation to go invalid.
Garmin G1000 Cockpit Reference Guide for the DA42-L360
Annunciations & Alerts
73