Garmin DA42-L360 Cockpit Reference Manual page 38

Integrated flight deck for the diamond da42-l360
Table of Contents

Advertisement

Flight planning
Selecting 'FPL 00' displays the active flight plan. If an active flight plan
is selected, 'REM' is an available option to display planning data for the
remainder of the flight plan.
NOTE: The page mode must be set to 'MANUAL' to perform the following
steps.
5) Turn the large FMS Knob to highlight the departure time (DEP TIME) field.
NOTE: The departure time on the Trip Planning Page is used for preflight
planning. Refer to the Utility Page for the actual flight departure time.
6) Enter the departure time. Press the ENT Key when finished. Departure time
may be entered in local or UTC time, depending upon system settings.
7) The flashing cursor moves to the ground speed (GS) field. Enter the ground
speed. Press the ent Key when finished. Note that in 'automatic' page
mode, ground speed is provided by the system.
8) The flashing cursor moves to the fuel flow field. Enter the fuel flow. Press
the ENT Key when finished. Note that in 'AUTOMATIC' page mode, fuel flow
is provided by the system.
9) The flashing cursor moves to the fuel onboard field. Enter the fuel onboard.
Press the ENT Key when finished. Note that in 'AUTOMATIC' page mode, fuel
onboard is provided by the fuel totalizer.
10) The flashing cursor moves to the calibrated airspeed (CALIBRATED AS) field.
Enter the calibrated airspeed. Press the ENT Key when finished. Note that
in 'AUTOMATIC' page mode, calibrated airspeed is provided by the system.
11) The flashing cursor moves to the altitude (IND ALTITUDE) field. Enter the
altitude. Press the ENT Key when finished. Note that in 'AUTOMATIC' page
mode, altitude is provided by the system.
12) The flashing cursor moves to the barometric setting (PRESSURE) field. Enter
the desired baro setting. Press the ENT Key when finished. Note that in
'AUTOMATIC' page mode, the baro setting is provided by the setting entered
on the PFD.
13) The flashing cursor moves to the air temperature (TOTAL AIR TEMP) field. Enter
the desired air temperature. Press the ENT Key when finished. Note that in
'AUTOMATIC' page mode, air temperature is provided by the system outside
air temperature.
22
Garmin G1000 Cockpit Reference Guide for the DA42-L360
190-01062-01 Rev. A

Advertisement

Table of Contents
loading

This manual is also suitable for:

G1000

Table of Contents