Garmin DA42-L360 Cockpit Reference Manual page 55

Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Press the OPERATE Softkey to begin displaying traffic. 'OPERATING' is
displayed in the Traffic Mode field.
4) Press the STANDBY Softkey to place the system in the Standby Mode.
'STANDBY' is displayed in the Traffic Mode field.
5) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
6) Press the TNA MUTE Softkey to mute the "Traffic Not Available" aural
alert.
Displaying Traffic on the Navigation Map
1) Ensure TIS is operating. With the Navigation Map displayed, press the
MAP Softkey.
2) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
traffic Advisory system (tAs) (Optional)
Displaying Traffic on the Traffic Map Page
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page. 'OPERATING' is
displayed in the Traffic Mode field.
3) Press the ALT MODE Softkey to change the altitude volume. Select the
desired altitude volume by pressing the BELOW , NORMAL , ABOVE , or
UNREST (unrestricted) Softkey. The selection is displayed in the Altitude
Mode field.
4) Rotate the Joystick clockwise to display a larger area or rotate counter-
clockwise to display a smaller area.
5) Press the MUTE Softkey to mute TAS voice alerts.
Displaying Traffic on the Navigation Map
1) Ensure TAS is operating.
2) With the Navigation Map displayed, press the MAP Softkey.
3) Press the TRAFFIC Softkey. Traffic is now displayed on the map.
190-01062-01 Rev. A Garmin G1000 Cockpit Reference Guide for the DA42-L360
hazard Avoidance
39