Manually Setting A Course - Garmin aera 190-01117-02 Pilot's Manual

MaNually SettiNG a cOurSe

Use the 'Set OBS and Hold' menu option to manually set your course to the
destination.
manually setting a course to the destination waypoint:
1) From the 'Home' Screen, touch the HSI/Panel or the Active FPl Icon.
2) Touch the menu Icon
3) Touch the ' Set OBS and Hold' menu option (only available when
navigating a Direct To or Flight Plan).
4) Touch the '+' or '-' Buttons to increase/decrease the value
Or:
Touch the Radial Button to enter the desired radial using the keypad and
touch the OK Icon.
HSI/Panel Option menu
Returning to automatic sequencing of route waypoints:
1) From the 'Home' Screen, touch the HSI/Panel or the Active FPl Icon.
2) Touch the menu Icon
3) Touch the 'Release Hold' menu option (only available when navigating a
Direct To or Flight Plan).
190-01117-02 Rev. A Garmin aera 500 Series Pilot's Guide
GPS Navigation
Radial Button
Set OBS
39