Connecting the cables:
Make all applicable cable connections.
Reconfiguring the yoke mount for center column yokes:
1) Loosen and remove the Cradle Adjustment Knob, spacer, and rubber
washer.
2) Rotate the clamp assembly 90
you.
3) Secure the clamp assembly to the rest of the yoke mount using the Cradle
Adjustment Knob, spacer, and rubber washer. Adjust the clamp angle
before fully tightening the Cradle Adjustment Knob.
190-01117-02 Rev. A
Cradle
Mini-USB Connector to the XM
Receiver (aera 510 & 560 only)
Garmin aera 500 Series Pilot's Guide
3.5mm Headphone/Audio Jack
Power Plug (3A Fuse)
so that the clamp opening faces away from
o
appendix d
137