Table of Contents
Advertisement
Change the default communications port if necessary by clicking on the down arrow and then clicking on
the correct coms port in the list.
Close down and re-start Markes TD software for the changes to take effect.
4.3
Mass Flow Controllers
Once the software has detected the UNITY 2, the User Interface will be loaded. A scan of the instrument
hardware will be performed to determine whether any Mass Flow Controllers (MFCs) are installed.
If any MFCs are detected they will need to be configured correctly. Please refer to the series 2 MFC
installation manual (QUI-1084) for further details.
4.4
GC Interface Logic
The GC interface logic options can be found under the GC Interface tab.
Markes International Ltd
T: +44 (0)1443 230935 F: +44 (0)1443 231531 E: enquiries@markes.com
www.markes.com
QUI-1056
Page 26
Advertisement
Table of Contents
