1. Manuals
  2. Brands
  3. SeaLevel Manuals
  4. Adapter
  5. MIL-188-C
  6. User manual

SeaLevel MIL-188-C User Manual

Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
MIL-188-C / MIL-188-114
SERIAL ADAPTER
SECTIONS:
1.
INSTALLATION
2.
3.
SOFTWARE INSTALLATION
4.
5.
SPECIFICATIONS
6.
WARRANTY
FIGURES:
1.
ADDRESS SELECTION TABLE
2.
3.
HEADER E2 (IRQ) ILLUSTRATION
4.
HEADER E4 (MULTI-IRQ) ILLUSTRATION
5.
6.
7.
SILK-SCREEN
8.
SCHEMATIC
PO BOX 830
155 Technology Place
LIBERTY SC 29657 USA
(864) 843-4343
© COPYRIGHT 1993 SEALEVEL SYSTEMS INCORPORATED
USER MANUAL
PART # 3202
FAX (864) 843-3067

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MIL-188-C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for SeaLevel MIL-188-C

Summary of Contents for SeaLevel MIL-188-C

  • Page 1 DIP SWITCH ILLUSTRATION HEADER E2 (IRQ) ILLUSTRATION HEADER E4 (MULTI-IRQ) ILLUSTRATION MIL-188-114 PIN-OUT MIL-188-C PIN-OUT SILK-SCREEN SCHEMATIC SEALEVEL SYSTEMS INCORPORATED PO BOX 830 155 Technology Place LIBERTY SC 29657 USA (864) 843-4343 FAX (864) 843-3067 © COPYRIGHT 1993 SEALEVEL SYSTEMS INCORPORATED...
  • Page 2 SECTION 1. INSTALLATION The MIL-188-C / MIL-188-114 adapter can be installed in any of the PC expansion slots except J8 on the original IBM "XT" and Portable. Remove the PC case, remove the blank metal slot cover, and insert the board.
  • Page 3 PORT ENABLE / DISABLE Each port on the MIL-188-C / MIL-188-114 adapter can be enabled or disabled with switch position 8 on the dip-switch. The port is enabled with the switch "On" or "Closed" and disabled when "Off" or "Open". If any port is disabled, be sure to also disable the interrupt request for that port by removing the IRQ jumper (see Figure 3).
  • Page 4 Operating System Installation For Windows Users Start by choosing Install Software at the beginning of the CD. Choose Asynchronous COM: Port Software, SeaCOM. Other Operating Systems Refer to the appropriate section of the Serial Utilities Software.
  • Page 5 • Part # 3202 The MIL-188-C / MIL-188-114 adapter utilizes the same 16450 UART chip found in the IBM asynchronous adapter. This chip features programmable baud rate, data format, and interrupt control. Refer to the IBM Technical Reference for details on programming this chip. The serial port can be set as COM1: or as COM2:, or as any other I/O address, providing total compatibility with most communications software and languages.
  • Page 6 MIL-188 SPECIFICATIONS Voltage levels MIL-188-C single ended input uses positive true logic. The normally idle, or marking, line is represented as +5 volts output. The start bit, or space condition, causes the output to switch to -5 volts. MIL-188-114 differential transmission utilizes two wires per signal. Signal voltage is at +5, while the other signal voltage is at -5 volts.
  • Page 7 Sealevel Systems, Inc. provides a lifetime warranty for this product. Should this product fail to be in good working order at any time during this period, Sealevel Systems will, at it's option, replace or repair it at no additional charge except as set forth in the following terms.

This manual is also suitable for:

Mil-188-114

Table of Contents