Table of Contents
Advertisement
26
electrolux.com.au
INSTALLATION PROCEDURE
1.
The bench cutout should be made as per cutout
dimensions .
2.
A djacent walls, cupboards and protection for
combustible materials: Ensure that the appliance
is installed in accordance with AS/NZS 5601.1,
or AS/NZS 5601.2 with regard to clearances to
combustible surfaces and materials, and clearances
to rangehoods and exhaust fans.
To ensure clearances of 200mm from burners
to vertical combustible surfaces observe the minimum
distance requirements .
Clearances to combustible surfaces may be
reduced if combustible surfaces are protected in
accordance with AS/NZS 5601.1, or AS/NZS 5601.2.
3.
For Ceramic Glass models a FOAM SEAL has been
provided and is to be applied along the perimeter of
the hob.
Advertisement
Table of Contents
