3-13. BD BOARD
4 BD board
3-14. DISC TABLE
Note: When the disc table is installed, adjust the positions of roller cam
and mark B as shown in the figure, then set to the groove of disc
table.
All manuals and user guides at all-guides.com
A
1 Screw (BVTP 3 × 8)
HCD-XGV6/XGV8/XGV10AV
BU-30BD62
3 Flat type wire (CN102)
1 Remove the two solders.
2 Remove the two solders.
2 Bracket (BU)
A
3 Step screw
4 Disc table
15