Alienware Aurora mALX User Manual

Alienware Aurora mALX User Manual

Alienware aurora malx: user guide
Table of Contents

Advertisement

Alienware Aurora mALX Technical Reference
Notice
The company reserves the right to revise this publication or to change its contents
without notice. Information contained herein is for reference only and does not
constitute a commitment on the part of the manufacturer or any subsequent vendor.
They assume no responsibility or liability for any errors or inaccuracies that may
appear in this publication nor are they in anyway responsible for any loss or damage
resulting from the use (or misuse) of this publication. This publication and any
accompanying software may not, in whole or in part, be reproduced, translated,
trans¬mitted or reduced to any machine readable form without prior consent from the
vendor, manufacturer or creators of this publication, except for copies kept by the user
for backup purposes. Brand and product names mentioned in this publication may or
may not be copyrights and/or registered trade¬marks of their respective companies.
They are mentioned for identification purposes only and are not intended as an
endorsement of that product or its manufacturer. ©May 2006
Trademarks
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. pat¬ents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home or other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineer¬ing or disassembly is prohibited. AMD Turion™ is a
trademark of Advanced Micro Devices, Inc.
is a trademark of SRS Labs, Inc. WOW technology is incorporated under license
from SRS Labs, Inc.


Advertisement

Table of Contents
loading

Summary of Contents for Alienware Aurora mALX

  • Page 1 They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, trans¬mitted or reduced to any machine readable form without prior consent from the...
  • Page 2 • Consult the service representative or an experienced radio/TV technician for help. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the manufacturer for compliance with the above standards could void...
  • Page 3: Important Safety Instructions

    There may be a remote risk of electrical shock from lightning. 3. Do not use the telephone to report a gas leak in the vicinity of the leak. 4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.
  • Page 4: Instructions For Care And Operation

    The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. 2. Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating ele¬ment.
  • Page 5: Power Safety

    • When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire. • Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
  • Page 6: Battery Precautions

    The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your areafor recycling options or proper disposal.
  • Page 7: Cleaning

    Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock. Refer all servicing to authorized service personnel. Unplug the computer from the power supply. Then refer servicing to qualified service personnel under any of the following conditions: •...
  • Page 8: Travel Considerations

    Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: 1. Check that the battery pack and any spares are fully charged. 2. Power off the computer and peripherals.
  • Page 9 Get power where you can - If an electrical outlet is available, use the AC/DC adapter and keep your battery(ies) charged. Keep it dry - If you move quickly from a cold to a warm location, water vapor can condense inside the computer. Wait a few minutes before turning it on so that...
  • Page 10 Alienware Aurora mALX Technical Reference Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.
  • Page 11: Table Of Contents

    Beginners and Not-So-Advanced Users, (18) Warning Boxes, (18) Not Included, (18) System Software, (19) System Startup, (20) System Map: Top View with LCD Panel Open, (21) LED Indicators, (23) AP-Key Buttons, (24) 3D Ap-Key Button, (24) Function Keys & Numeric Keypad, (25) System Map: Front &...
  • Page 12 Configuring the Power Button, (52) Battery Information, (53) New Battery, (53) Battery Life, (53) Recharging the Battery with the AC/DC Adapter, (54) Proper handling of the Battery Pack, (54) Battery FAQ, (55) Drivers & Utilities, (6) What to Install, (56)
  • Page 13 The Setup Program, (71) Entering Setup, (71) Setup Screens, (71) Main Menu, (72) System Time & Date (Main Menu), (72) Primary Master/SATA Port 3/4 (Main Menu), (72) System/Extended Memory: (Main Menu), (72) Advanced Menu, (73) Advanced Chipset Control (Advanced Menu), (73)
  • Page 14: Overview

    Upgrading and Adding New Hardware/Software, (112) Problems & Possible Solutions, (113) Interface (Ports & Jacks) Overview, () Ports and Jacks, (115) NVIDIA Video Driver Controls NVIDIA Video Driver Installation, () 3D Ap-Key Button, (118) NVIDIA Display Properties, (119) Additional Properties, (120)
  • Page 15 Alienware Aurora mALX Technical Reference Specifications, () Latest Specification Information, (131)
  • Page 16 Alienware Aurora mALX Technical Reference...
  • Page 17 Alienware Aurora mALX Technical Reference Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following: •...
  • Page 18: Advanced Users

    If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “Drivers & Utilities” on page 4 - 1, “BIOS Utilities” on page 5 - 1 and “Upgrading The Computer” on page 6 - 1 in the User’s Manual. You may also find the notes marked with a of interest to you.
  • Page 19: System Software

    “What to Install” on page 4-1 for installation instructions. Ports and Jacks See “Ports and Jacks” on page A-2 for a description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet, etc.
  • Page 20: System Startup

    3. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. 4. Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.
  • Page 21: System Map: Top View With Lcd Panel Open

    Alienware Aurora mALX Technical Reference System Map: Top View with LCD Panel Open Figure 1 -2 - Top View with LCD Panel Open LED Indicators Table 1 - 2 - LED Power & Communication Indicators 1. Optional Built-In PC Camera 2.
  • Page 22 Hard Disk Activity Green Number Lock Activated Green Caps Lock Activated Green Scroll Lock Activated (to activate press Fn & Scr Lk) Orange DC Power is Plugged In Table 1 - 2 - LED Power & Communication Indicators Icon Color...
  • Page 23: Ap-Key Buttons

    AC/DC adapter (the 3D Ap-Key button will be illuminated in blue when in high performance video mode). If you switch from AC Power to battery power the sys¬tem will automatically change to a lower performance video mode setting. High Performance Video can not be enabled when the system is battery powered.
  • Page 24: Function Keys & Numeric Keypad

    Figure 1 - 2 on page 1 8). Activate the Number Lock feature by pressing the Num Lk key at the top right of the keyboard. You may check if Number Lock is enabled or not by looking at the LED status indicators.
  • Page 25 Figure 1 - 2 - Keyboard Other Keyboards If your keyboard is damaged or you jsut want to make a change, you can use any standard USB keyboard. The system will detect and enable it automatically. However, special functions/hot keys unique to the system’s regular keyboard may not work.
  • Page 26: System Map: Front & Rear Views

    4. DVI-Out Port 5. DC-In Jack 6. Vent/Fan Intake 7. RJ-11 Phone Jack 8. 2 * USB 2.0 Ports 9. Serial Port 10. S-Video-In Jack* 11. Security Lock Slot * Enabled with Optional Mini-PCI TV Tuner Only S-Video/Composite Cable HDTV Cable...
  • Page 27 Alienware Aurora mALX Technical Reference -Pin S-Video-Out Jack The 7-pin S-Video requires an adapter cable (7-pin S-Video plug to 4-pin S-Video jack adapter) in order to connect to a standard S-Video cable (the y-cable pictured includes a yellow composite video jack)
  • Page 28: Media Warning

    Manager, then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialogue box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code (see “DVD Regional Codes” on pages 2-5).
  • Page 29: System Map: Right View

    -in- Card Reader The card reader allows you to use the most popular digital storage card formats: MMC (MultiMedia Card) / SD (Secure Digital) / MS (Memory Stick) / MS Pro (Memory Stick Pro) / MS Duo (requires PC adapter) Mini-IEEE a The Mini-IEEE 1394a port only supports SELF POWERED IEEE 1394a devices.
  • Page 30: System Map: Bottom View

    Battery Information Always completely discharge, then fully charge, a new battery before using it. Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges. See “Battery Information” on page 3-9 for full instructions.
  • Page 31: Windows Xp Start Menu & Control Panel

    Windows versions) are accessed from the Start menu. When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop. Right-click the Start menu icon , and then select Properties if you want to customize the appearance of the Start menu.
  • Page 32: Video Features

    1 - 18). 4. Click the arrow, and scroll to the preferred setting In Colors: 5. Click Advanced Settings (button) (Figure 1 - 9 on page 1 - 15) to bring up the Advanced properties tabs. 7. The nVidia Control Panel can be accessed by right clicking over the Desktop, and selecting the nVidia Control Panel option from the Menu.
  • Page 33 Alienware Aurora mALX Technical Reference Figure 1 -8 - Display Properties Desktop...
  • Page 34: Power Options

    Figure 1 - 9 - Power Options The computer’s power button, sleep button (Fn + F4 key combination), and lid (closing the lid) may be set to send the computer in to either Stand by or Hibernate mode. Power Saving and Performance Power Schemes may have an affect on your computer performance (see “Power...
  • Page 35: Storage Devices, Mouse, Audio & Printer, (6)

    • Adding a Printer Hard Disk Drive The hard disk drive is used to store your data in the computer. The hard disk can be taken out to accommodate other 2.5” serial (SATA) hard disk drives with a height of 9.5 mm.
  • Page 36: Optical Device

    (see “Storage Options” on page C 3). The optical device is usually labeled “Drive D:” and may be used as a boot de¬vice if properly set in the BIOS (see “Boot Menu” on page 5 - 12).
  • Page 37: Handling Cds Or Dvds

    Note the following: • Hold the CD or DVD by the edges; do not touch the surface of the disc. • Use a clean, soft, dry cloth to remove dust or fingerprints. • Do not write on the surface with a pen.
  • Page 38: Dvd Regional Codes

    Alienware Aurora mALX Technical Reference DVD Regional Codes To change the DVD regional codes see “Changing DVD Regional Codes” on page 1 - 10. DVD Regional Coding Region Geographical Location USA, Canada Western Europe, Japan, South Africa, Middle East & Egypt...
  • Page 39: 7-In-1 Card Reader

    Figure 2 - 4 Right View 1. Card Reader Card Reader Cover Make sure you keep the cover in the card reader when not in use. This will help prevent foreign object and/or dust getting in to the card reader.
  • Page 40: Pc Card Slot

    The computer is equipped with a PCMCIA 3.3V/5V slot for one type II PC Card. Inserting and Removing PC Cards • Align the PC Card with the slot and push it in until it locks into place. • To remove a PC Card, simply press the eject button 1.
  • Page 41: Touchpad And Buttons/Mouse

    The central button may be configured to function as you require. Once you have installed the TouchPad driver (see page 4 - 10) you can configure the functions by double-clicking the TouchPad driver icon in the taskbar. You may then configure the TouchPad tapping, buttons, scrolling, pointer motion and sensi¬tivity...
  • Page 42: Audio Features

    Windows. Figure 2-7 AC97 Audio Configuration Menus Sound Volume Adjustment How high the sound volume can be set depends on the setting of the volume control within Windows. Click the Volume icon on the taskbar to check the setting.
  • Page 43: Adding A Printer

    Adding a Printer The most commonly used peripheral is a printer. The following conventions will help you to add a printer, however it is always best to refer to the printer manual for specific instructions and configuration options. USB Printer Most new printers have a USB interface connection.
  • Page 44: Overview

    Power management functions will vary slightly depending on your operating system. For more information it is best to refer to the user’s manual of your operating system. (Note: All pictures used on the following pages are from the Windows Vista OS)
  • Page 45: The Power Sources

    4. Press the power button to turn “On”. Battery The battery allows you to use your computer while you are on the road or when an electrical outlet is unavailable. Battery life varies depending on the applications and the configuration you’re using. To increase battery life, let the battery discharge completely before recharging (see “How do I completely discharge the battery?”...
  • Page 46: Turning On The Computer

    Alienware Aurora mALX Technical Reference Turning on the Computer Now you are ready to begin using your computer. To turn it on simply press the power button on the front panel. When the computer is on, you can use the power button as a Stand by/Hibernate/ Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and holding the power button for longer than this will shut the computer down).
  • Page 47: Power Schemes

    (or modify) an existing power plan, or create a new one. The settings may be adjusted to set the display to turn off after a specified time, and to send the computer into Sleep after a period of inactivity.
  • Page 48 Alienware Aurora mALX Technical Reference Each Windows power plan will also adjust the processor performance of your machine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power).
  • Page 49: System Power Options

    You can use either method depending on your needs. Sleep vs. Hibernate If you want to stay away from your work for just a while, you can put the system into Sleep instead of in hibernation. It takes a longer time to wake up the system from Hibernate mode than from Sleep mode.
  • Page 50: Hibernate

    Alienware Aurora mALX Technical Reference Sleep The Sleep Button in the Start Menu (not available in Classic View) can be used to send the computer into Sleep. Note that Sleep is the default power saving state in Windows Vista. Sleep uses very little system power, and takes a short time to return to full operation.
  • Page 51: Configuring The Power Button

    Alienware Aurora mALX Technical Reference Configuring the Power Button The power/sleep button (Fn + F4 key combo ///////// ) and closed lid may be set to send the computer in to either Sleep or Hibernate. In Sleep, the LED will blink green.
  • Page 52: Battery Information

    Low Battery Warning When the battery is critically low, immediately connect the AC/DC adapter to the computer or save your work, otherwise, the unsaved data will be lost when the power is depleted. Figure 3-5 Battery Icon (Taskbar) & Battery Advanced Settings...
  • Page 53: Conserving Battery Power

    Alienware Aurora mALX Technical Reference Conserving Battery Power • Use a power plan that conserves power (e.g Power saver), however note that this may have an affect on computer performance. • Lower the brightness level of the LCD display. The system will decrease LCD brightness slightly to save power when it is not powered by the AC/ DC adapter.
  • Page 54: New Battery

    30 days. We recommend that you do not remove the battery yourself. If you do need to remove the battery for any reason see “Removing the Battery” on page 6 - 3.
  • Page 55 Damaged Battery Warning Should you notice any physical defects (e.g. the battery is bent out of shape after being dropped), or any unusual smells emanating from the notebook battery, shut your computer down immediately and contact your service center. If the battery has...
  • Page 56: Battery Faq

    Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer even if a message indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.
  • Page 57 30 days. We recommend that you do not remove the battery yourself. If you do need to remove the battery for any reason see “Removing the Battery” on page 6 - 3.
  • Page 58 The system will default to high performance video when powered by the AC/DC adapter (the 3D Ap-Key button will be illuminated in blue). If you switch from AC power to battery power the system will automatically change to a lower performance video mode setting in order to save power.
  • Page 59 Diagnostics: The POST (Power-On Self Test) Configuration: The Setup utility If your computer has never been set up, or you are making important changes to the system (e.g. hard disk setup), then you should review this chapter first and note the original settings found in Setup.
  • Page 60: The Power-On Self Test (Post)

    POST, including a quick test of the on-board RAM (memory). As the POST proceeds, the computer will tell you if there is anything wrong. If there is a problem that prevents the system from booting, it will display a system summary and prompt you to run Setup.
  • Page 61: Failing The Post

    Press F1 to see if the boot process can continue. It may work, without the correct configuration. Press F2 to run the Setup program and try to correct the problem. If you still get an error message after you change the setting, or if the “cure” seems even worse, call for...
  • Page 62: The Setup Program

    To enter Setup, turn on the computer and press F2 during the POST. The prompt (Press F2 to Enter Setup) seen in Figure 5 - 1 on page 5 - 2 is usually present for a few seconds after you turn on the system. If you get a “Keyboard Error”, (usually because you pressed F2 too quickly) just press F2 again.
  • Page 63: Main Menu

    Figure 5 - 2 Main Menu System Time & Date (Main Menu) The hour setting uses the 24-hour system (i.e., ØØ = midnight; 13 = 1 pm). If you can change the date and time settings in your operating system, you will also change these settings.
  • Page 64: Advanced Menu

    Mouse), and FIR (Infrared) transceiver. Reset Configuration Data (Advanced Menu) This item is set to No as default. You can change the setting to Yes if you have in¬stalled a new add-on which has reconfigured the system, resulting in such a serious system conflict that the operating system is unable to boot.
  • Page 65: Security Menu

    Figure 5 - 4 Security Menu Set Supervisor Password (Security Menu) You can set a password for access to the Setup utility. This will not affect access to the computer OS, (only the Setup utility) unless you choose to set a Password on Boot (see over).
  • Page 66 If you set a boot password (Password on boot is “Enabled”). NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 67: Boot Menu

    If it cannot find the operating system on that device, it will try to load it from the next device in the order specified in the Boot priority order. Item specific help on the right is available to help...
  • Page 68: Exit Menu

    Choosing to Discard Changes, or Exit Discarding Changes, will wipe out any changes you have made to the Setup. You can also choose to restore the original Setup defaults that will return the Setup to its original state, and erase any previous changes you...
  • Page 69: When Not To Upgrade

    This chapter contains information on upgrading the computer. Follow the steps outlined to make the desired upgrades. If you have any trouble or problems you can contact your service representative for further help. Before you begin you will need: • A small crosshead or Phillips screwdriver •...
  • Page 70: Upgrading The Processor

    If you want to upgrade your computer by replacing the existing processor with a faster/ new one you will need to contact your customer service representative. We recommend that you do not do this yourself, since if it is done incorrectly you may damage the processor or mainboard...
  • Page 71: Hdd System Warning

    The hard disk drive(s) can be taken out to accommodate other 2.5” serial (SATA II) hard disk drives with a height of 9.5mm (h) (see “Storage Options” on page C - 3). Follow your operating system’s installation instructions, and install all necessary drivers and utilities when setting up a new hard disk.
  • Page 72 Alienware Aurora mALX Technical Reference 1. Turn off the computer, and turn it over and remove the battery. 2. Locate the hard disk bay cover and remove screws 3. Remove the bay cover Figure 6 - 2 HDD Bay Cover Removal 4.
  • Page 73: Upgrading The System Memory (Ram)

    The computer has two memory sockets for 200 pin Small Outline Dual In-line (SO¬DIMM) DDR type memory modules (see “Memory” on page C -2). The total mem¬ory size is automatically detected by the POST routine once you turn on your com¬puter.
  • Page 74 Alienware Aurora mALX Technical Reference 4. Gently pull the release latches (15 & 16) on the sides of the memory socket in the direction indicated by the arrows in Figure 6 - 6. Figure 6 - 6 RAM Module Release 5.
  • Page 75: Contact Warning

    Alienware Aurora mALX Technical Reference 6. Pull the latches to release the second module if necessary. 7. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory socket. 8. The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the socket as it will go.
  • Page 76: Upgrading The Optical (Cd/Dvd) Device(S)

    Upgrading the Optical (CD/DVD) Device(s) 1. Turn the computer off, turn it over and remove the battery. 2. Slide the latch towards the unlock symbol and hold it in place. 3. Slide the optical device out of the computer at point...
  • Page 77: Removing The Video Card(S)

    6. Disconnect cable , and lift the video card off the computer. Single Video Card Note that if you are using a single video card, it must be inserted into Slot A (i.e. the left sided slot when viewed from the bottom with the front of the bachine towards you).
  • Page 78 Support Disc). PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. You can access these options by clicking on Start, and accessing the Control Panel.
  • Page 79 When the Wireless LAN module is powered on, the LED will be green. Be sure that the WLAN module is enabled when you are installing the drivers for it. Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited.
  • Page 80: Basic Hints And Tips

    (see Table 1 - 4, on page 1 - 8). • Display Choice - Press Fn + F7 to make sure the system is not set to “external only” display (see Table 1 - 4, on page 1 - 8).
  • Page 81: Backup And General Maintenance

    • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wallet.
  • Page 82: Troubleshooting

    Troubleshooting Don’t over complicate things. The less you have to deal with then the easier the source of the problem may be found; Example - if your computer has many devices plugged into its ports, and a number of programs running, then it will be difficult to determine the cause of a problem.
  • Page 83 Make sure the computer is properly ventilated and the vents/fan intakes are not blocked. If too hot. this doesn’t cool it down, put the system into Hibernate mode or turn if off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating” on page 1-9). Make sure you’re using the correct adapter.
  • Page 84 If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious.If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 85: Ports And Jacks

    LCD and external monitor/FPD (see “Display Devices & Options” on DVI-Out Port page 1-14).If you are using an older type of monitor you will need to use a converter to convert the signal from DVI to VGA. Use this jack to connect theTV antenna if you have included the optional TV Antenna Jack Mini-PCI TV Tuner in your purchase.
  • Page 86 S-Video-In Jack Connect your television to your computer and view DVDs,VCDs or anything else your computer can display. You will need a 7-pin S-Video plug to 4-pin S-Video jack adapter and S-Video cable to make the connection (see “7-Pin 7-Pin S-Video-Out Jack S-Video-OutJack”on page 1-9).
  • Page 87 The Line-In jack allows you to play audio sources through the computer’s speakers. Note that audio input through Line-in will default to the mute setting. To set up your audio sources to play through the Line-in jack go to Line-In Jack the Sounds and Audio Devices Windows control panel and make sure the Mute box is not ticked.
  • Page 88 ModularDesign Storage Options One Changeable 2.5” 9.5mm (h) Serial-ATA II (SATA II) Hard Disk Drive One Changeable Optical Device Bay-12.7 mm (h) for Optical CD/DVD Device Drive Options (see“Optional”onpage C- 5) Card Reader Built-In 4-in-1 Card Reader (SD/MMC/MS/MS Pro) Audio...
  • Page 89 Windows XP SP2 and Windows Vista Supported Power Supports ACPI 2.0 Management Power Full Range AC/DCAdapter–AC in100 ~ 240V,47 ~ 63Hz DC Output 20V, 11 A (220Watts) Easy Changeable 12-Cell Smart Lithium-Ion 6600mAH /14.8V Main Battery Envirnonmental Temperature Relative Humidity Spec Operating: 5°C~ 35°C...
  • Page 90 Alienware Aurora mALX Technical Reference...

Table of Contents