Table of Contents
Advertisement
3. Remove the battery.
4. Remove the
M.2 2230 solid-state drive
5. Remove the
wireless
card.
6. Remove the
rear
I/O-cover.
7. Remove the
system
board.
About this task
The following image(s) indicate the location of the headset port and provides a visual representation of the removal procedure.
Steps
1. Peel the headset-port cable from the palm-rest and keyboard assembly.
2. Turn the palm-rest and keyboard assembly over.
3. Remove the screw (M1.6x3) that secures the headset port to the palm-rest and keyboard assembly.
4. Using a plastic scribe, push the headset port off the slot on the palm-rest and keyboard assembly.
5. Release the headset-port cable through the slot carefully.
6. Lift the headset port, along with its cable, from the slot on the palm-rest and keyboard assembly.
or
M.2 2280 solid-state
drive, as applicable.
53
Advertisement
Table of Contents
