Table of Contents
Advertisement
Connect the DC + and DC- cables to the correct DC + and DC- terminals on the product.
Do not step on the product or product packaging. The product may be damaged.
Do not discard the battery in a fire. The battery may explode.
Do not open or damage the battery. The electrolyte released may be toxic and harmful
to the skin and eyes.
Batteries are in danger of electric shock and large current discharge during short circuit.
Pay attention to the following when installing the battery.
a ) Disassemble watches, rings or other metal objects.
b ) Use tools with insulated handles.
c ) Wear insulated gloves and boots.
d ) Do not place tools or metal parts on top of the battery.
REMARK INFORMATION:
Before connecting, please make sure that the open circuit voltage of the photovoltaic
array is within the acceptable range of the inverter to which the product is adapted,
otherwise the product may be damaged.
Never use any solvents, abrasives or corrosive substances to clean this product.
Do not store or place any objects on the product. It may cause serious defects or
malfunctions.
Before connecting the product to the inverter harness, make sure that the product is
turned off, the inverter is turned off and the mains and PV channels are disconnected.
The wiring harness of the Powerporter product is only allowed to be connected to the
adaptable inverter. Do not connect this product directly to the AC power supply or
generator. Connecting the product to other external devices may cause serious damage
to the device.
The product transportation process should be as stable as possible, to avoid the product
in the environment of severe vibration.
The supply of products should be performed or supervised by personnel with battery
knowledge and necessary precautions.
6
Advertisement
Table of Contents
