Powerporter Installation Location - nRuiT Powerporter 12.2kWh Owner's Manual

List of Goods
No. Project
1 Powerporter
2 Power Cable×4
3 COM1 Cable×1
4 COM2 Cable×1
5 DTU
6 User Manual×1
7 Rj45 Port × 1

Powerporter Installation Location

The product installation must meet the requirements described below.
10
Explanation
12.2kWh energy storage battery.
Connect with the inverter to carry out power transmission with it.
Connect with inverter and communicate with it
Connect with DTU and communicate with it
Data Transfer unit
-
Support simultaneous communication with two inverters (for parallel
use of two inverters).
 This product is recommended for indoor use. If the product is installed
outdoors, it must be ensured that the product is not exposed to direct
sunlight, wetted by liquid, or blown by strong wind under any
circumstances.
 It is recommended to install this product in the place where
photovoltaic cables, mains cables and capacity are arranged.
 This product is only suitable for vertical wall-to-wall installation. Do
not lay this product on the ground.
 The mounting surface must be able to bear this weight. Product (~ 115
kg).