Summary of Contents for nRuiT Powerporter 12.2kWh
- Page 1 Powerporter 12.2kWh Owner’s Manual Version 2.0 nRuiT strongly advises to take due care in following the owner’s manual. A warranty claim is invalid if damage is caused by human error, inconsistent with the manual.
- Page 2 ©2020 nRuiT Energy All rights reserved All information in this document is subject to copyright and other intellectual property rights of nRuiT Energy. This material cannot be modified or copied, additional information may be provided upon request. The following are trademarks or registered trademarks of nRuiT Energy in China and Other Countries.
-
Page 3: Table Of Contents
Powerporter Communication Interface ..........................14 Operating ....................................16 Troubleshooting ..................................16 Technical Support ..................................17 4. How to deal with an emergency ............................17 5. When the product is turn off and not in use........................18 nRuiT Quality Assurance ............................ 20... -
Page 4: Important Safety Instructions
Powerporter installation and service require knowledge of high voltage electricity and should only be performed by nRuiT Certified Installers. Powerporter is not responsible for injuries or property damage caused by unqualified personnel trying to repair or failing to follow these instructions correctly. -
Page 5: Caution Information
Wear rubber gloves and protective clothing (protective glasses and boots) when working on high-voltage / high-current systems (such as PCS and battery systems). Please do not remove the product cover, there is a risk of electric shock, and there are no user-usable parts inside. -
Page 6: Remark Information
Connect the DC + and DC- cables to the correct DC + and DC- terminals on the product. Do not step on the product or product packaging. The product may be damaged. Do not discard the battery in a fire. The battery may explode. ... -
Page 7: Powerporter Warranty
1. Powerporter Warranty For specific warranty details, see the attached page of this document. For more information, please refer to the Powerporter Warranty in your region. www.nruit-power.com. 2. Care and Maintenance Environmental Requirements Powerporter can charge and discharge within the operating temperature range specified below. - Page 8 (Note: The actual Residential ESS may also include electrical equipment such as distribution boxes and metering meters) Powerporter is a lithium-ion battery pack that can store electrical energy and outputs DC current. Powerporter only maintains electrical connection with the inverter. The electrical energy generated by the PV is converted by the inverter Dc to DC and stored in the connected Powerporter.
-
Page 9: Monitoring Your System
Pure off-grid power supply The system can be connected to diesel generators to ensure uninterrupted power supply in areas without city power (such as islands and remote mountain areas). (Note: The scheduling management of electrical energy in the system depends on the inverter. -
Page 10: Powerporter Installation Location
List of Goods Project Explanation Powerporter 12.2kWh energy storage battery. Power Cable×4 Connect with the inverter to carry out power transmission with it. COM1 Cable×1 Connect with inverter and communicate with it COM2 Cable×1 Connect with DTU and communicate with it Data Transfer unit User Manual×1 Support simultaneous communication with two inverters (for parallel... -
Page 11: Powerporter Interface Panel
The suitable operating temperature of the product is 0℃~45℃. Do not install this product in direct sunlight. Install the product in a clean and cool room. This product must not be installed or used at an altitude of more than 2000 meters. -
Page 12: Powerporter Power Cable Connection
－ Battery negative POWER Power button COM1 Communicate with inverter (support CAN and RS485) COM2 Communication with PC, used for product debugging and upgrading interface Touchdown Powerporter power cable connection The positive and negative poles of the Powerporter adopt a quick-plug interface, and the positive and negative poles can be distinguished by color (orange indicates the positive pole, black indicates the negative pole), and the installer can directly connect the power harness to the positive and negative poles of the product when wearing protective gloves. - Page 13 inverter must be turned off. Power harness disconnection steps: ① The inverter mains line is open, and the PV line is open. Turn off the inverter switch. ② Wait until the inverter screen is closed. ③ Press and hold the POWER button until the button light turns off. ④...
-
Page 14: Powerporter Communication Interface
① Make sure the power harness is disconnected. ② Press and hold the POWER button (2S ~ 3S) until the Power button indicator turns off and release. ③ Product shutdown. Remarks: Before the product is turned off, the internal relay of the battery will produce sound when it is switched on / off, which is normal. - Page 15 If you need to use our products for your inverter, please provide communication protocol and contact us. support@nruit-power.com Connect with Inverter Powerporter supports to connect two inverters at the same time, but need to consider the output power of the inverter, long-term operation must ensure that the battery charge and discharge current ≤180A.
-
Page 16: Operating
Warning: If the Powerporter failure causes downtime and cannot be resolved in time, please report to nRuiT or nRuiT authorized service partner in time. If not reported to nRuiT or nRuiT authorized service partner within 2 weeks after the failure, the warranty is invalid. -
Page 17: Technical Support
Technical Support If you need further assistance, please contact the nRuiT service team via the support phone in your area, or send an email to：support@nruit-power.com When contacting nRuiT, please provide the following information： Name of owner. Your effective way (phone, mobile phone or email) can let nRuiT contact. -
Page 18: When The Product Is Turn Off And Not In Use
Cut off all input and output circuit breakers in the distribution box. Contact nRuiT technical support or nRuiT authorized dealers for help in time. 5. When the product is turn off and not in use Powerporter is a lithium-ion battery product and should not be stored for a long time. - Page 19 The primary purpose of this Warranty is to clearly define the matters related to warranty policy of Products. 2. Warranty Condition nRuiT warrants that, under normal use, the Product will be free from defects in material and workmanship in accordance with its applicable technical specifications.
-
Page 20: Nruit Quality Assurance
Service products/parts are able to be used as new or refurbished condition which performance is equal to or higher than defective Products and guaranteed by nRuiT. In the event the Products are not available in the market anymore, nRuiT, at its option, may replace it with different kind of product with equivalent functions and performances. - Page 21 Service Hotline： headquarters（China） ：+86 0769 28823662 Cambodia：+855 0969594855 8. Applicable Law The Warranty is subject to the law of the region sold. Products come with guarantees that cannot be excluded under the local Law. The Buyer is entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.