Table of Contents
Advertisement
Wear rubber gloves and protective clothing (protective glasses and boots) when
working on high-voltage / high-current systems (such as PCS and battery systems).
Please do not remove the product cover, there is a risk of electric shock, and there are
no user-usable parts inside. Request service from qualified and approved service
technicians. Do not touch uninsulated wires.
In the event of a failure, the system cannot be restarted. Product repairs must be
performed by qualified personnel or authorized support center personnel.
CAUTION INFORMATION:
The Powerporter and its accessories are contained in this box, the total weight is too
large. Because the product is too heavy, it may cause serious injury. Therefore, special
care must be taken when handling. Make sure that at least two people deliver and move
the package.
Do not use damaged, cracked or frayed cables and connectors. Protect the cable from
physical or mechanical damage, such as the cable being twisted, twisted, clamped,
closed on the door, or trampled by someone. Check the cable of your product regularly.
If its appearance shows damage or deterioration, stop using this product and contact a
qualified person to replace the cable.
Make sure that the product you are connecting is grounded to prevent possible electric
shock. Do not attempt to achieve grounding by connecting the product to telephone
lines, lightning rods, or gas pipes.
If the Powerporter is defective, cracked, broken or otherwise damaged or inoperable,
please do not use the Powerporter again.
This product should not come into contact with water (drip or splash), and should not
place objects filled with liquids such as vases on this product.
To prevent the risk of fire or electric shock, do not expose this product to rain or
moisture.
Do not block any vents. Ensure reliable product operation and prevent overheating. No
objects should be placed on this product to block the opening.
During operation, the temperature of the metal casing may be very high.
Products must be handled in accordance with local regulations.
The electrical installation of this device must be carried out by an electrician or
technician with PCS qualification.
To avoid radio interference, all accessories (such as smart meters) connected to the
product must be suitable for residential, commercial and light industrial areas.
5
Advertisement
Table of Contents
