Table of Contents
Advertisement
STEP 6-COMPLETING THE INSTALLATION
To complete the installation and system checkout requirements, the following steps must be
performed.
1.
Check the thermostat position. Make sure the thermostat is routed through the holding guide
and is not touching any metal surface.
2.
Secure the ceiling grille to the ceiling assembly wind-path with 4 screws. (see Figure 9).
3.
Install the healthy filter and air intake grill. Press "PUSH" and lock with clasps.
4.
Switch on the power supply and check the unit work or not.
5.
Once the indoor unit is assembled, if the gap between the panel and the top of
vehicle is not even, please ask the manufacturer to adjust it according to the
assembly status.
front panel
Figure 9
filter
4 screw
- 18 -
wind-path
front grill
Advertisement
Table of Contents
