Table of Contents
Advertisement
MENU button
Press this button to select submenu function and
then press " SET " button to set the function
status of submenu. The submenu can be select-
ed circularly as follows:
blank
No Setting
NOTE
●
Some menu's function may be unavailable under
different models.
Light function
When selecting light function, light icon "
flashes for 5s; press "SET" button within 5s to
turn off display light on indoor unit and "
on remote controller disappears. Press "SET"
button again within 5s to turn on display light and
"
" icon is displayed.
Sleep function
When selecting sleep function, sleep icon "
flashes for 5s; press " SET " button within 5s to
turn on sleep function and "
on remote controller. Press " SET " button again
within 5s to turn off sleep function and "
disappears.
up & down swing function
Not available for this unit.
Ambient temperature display function
When selecting ambient temperature display
function, icon "
" flashes for 5s; press "SET"
button within 5s to select ambient temperature
display on or off. After setting
"
" icon will be displayed on remote controller
and you can see indoor ambient temperature on
indoor unit's displayer for a few seconds.
TIMER ON function
TIMER ON function can set the time for timer on.
Under TIMER ON function status , "
pears and the word "ON" on remote controller
blinks. Press "+" or "-" button to adjust TIMER ON
setting. After each pressing "+" or "-" button
TIMER ON setting will increase or decrease 1min.
TIMER
TIMER
ON
OFF
" icon
" icon is displayed
" icon
function on, the
" icon disap-
Hold "+" or "-" button, 2s later, the time will change
quickly until reaching your required time.Press
"SET" button to confirm it within 5S. The word
"ON" will stop blinking.
Cancel TIMER ON: Press "MENU" button to
TIMER ON function and the characters "ON" flash-
es on the remote controller; press "SET" button
until the characters "ON" disappears.
TIMER OFF function
TIMER OFF function can set the time for timer off.
Under TIMER OFF function status , "
disappears and the word "OFF" on remote control-
ler blinks. Press "+" or "-" button to adjust TIMER
OFF setting. After each pressing "+" or "-" button
TIMER OFF setting will increase or decrease 1min.
"
Hold "+" or "-" button, 2s later, the time will change
quickly until reaching your required time, press
"SET" button to confirm it within 5S. The word
"OFF" will stop blinking.
Cancel TIMER OFF: Press "MENU" button to
TIMER OFF function and the characters "OFF"
flashes on the remote controller; press "SET"
button until the characters "OFF" disappears.
"
CLOCK function
CLOCK function can se t
CLOCK function status, "
troller will blink. Press "+" or "-" button within 5s to
set clock time. Each pressing of "+" or "-" button,
clock time will increas e or decrease 1 min. If hold
"+" or "-" button , 2s later, time will change quick-
ly. Release this button when reaching your
required time, press "SET" button to confirm it
within 5S. The "
LED button
Press this button can turn on or turn off the LED light
on the panel.
- 7 -
clock
t ime. Under
indi
"
" icon on remote con-
" icon will stop blinking.
" icon
Advertisement
Table of Contents
