Control Panel - Sinclair ASV-35BS User Manual

Note: If the remote controller is missing, operate on the control panel.
6
5
ON/OFF button
1
Operation starts when pressing this button, and
stops when pressing this button again.
LIGHT button
2
Press this button to turn on or turn off display
light on indoor unit.
(+/-) button
3
Press the + button to increase the set(operating)
temperature of the unit,and press the - button to
decrease the set(operating) temperature of the
unit. the temperature setting range is from 16~30℃
o
(61~86 F).
FAN SPEED button
4
Select the fan speed LOW, MED, HIGH and TURBO
(This function is applicable to partial of models) in
sequence.

CONTROL PANEL

ON/OFF temp.
indicator indicator
4 3
COOL
indicator
2
MODE button
5
Select the operation mode, COOL,FAN,
HEAT.
FILTER CHECK indicator
6
This feature is a reminder of cleaning the air
filter(normal maintenance) for more efficient
operation. The light will turn on automatically
after the fan works more than 250 hours.
If the light is on, turn off and power off the
unit, take the air filter out and clean it, then
re-install the air filter, power on and turn
on the unit, the light will still be on, press
+ button for 5s,the light will turn off.
- 9 -
receiver
window
HEAT
indicator
1