maximuscle 335 / 8687 Assembly & User's Instruction page 8

Assembly Instruction
Recommend the assembly if this equipment is carried by two person
:
NOTE: Tool required assembly the machine: two adjustable wrenches, and one Philips screw driver
Step 1
a. Insert two Weight stack guide rods(22)
into the holes on the Rear stabilizer (2), fix
using two M10 x 25mm Allen bolts (84), two
Ø10mm Washers (93) from the bottom.
b. Slide two Rubber cushions (63) down to
the Weight stack guide rods (22).
Step 2
a. Attach Base frame (1) to the Rear stabilizer
(2), line up the holes, fix using two M10 x
75mm Carriage bolts (78), one U–shaped
bracket (30), two Ø10mm Washers (93) and
M10 Aircraft nuts (95).
7