Removing And Reinstalling The Main Parts - Sharp CD-CH1500H Service Manual

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION
Perform steps 1 to 4 and 8 of the disassembly method to
remove the tape mechanism.
How to remove the record/playback and erase
heads (See Fig. 15-1)
1. When you remove the screws (A1) x 2 pcs., the recording/
playback head and three-dimensional head of the erasing
head can be removed.
How to remove the pinch roller (See Fig. 15-2)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (B1) x 2 pcs., in the
direction of the arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (See Fig. 15-3)
1. Remove the motor.
2. Remove the main belt (C1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (C2) x 1 pc.
How to remove the motor (See Fig. 15-4)
1. Remove the belt.
2. Remove the screws (D1) x 2 pcs., to remove the motor.
All manuals and user guides at all-guides.com
– 15 –
CD-CH1500H/CD-CH1500W
Erase
Head
(A1)x2
Ø2 x 6mm
Figure 15-1
(Left)
Pinch
Roller
Pawl
Pull
Pinch
<A>
Roller
Pull
(B1)x2
<B>
Figure 15-2
FF/REW Belt
(C2)x1
Main Belt
(C1)x1
Cam Gear
Figure 15-3
Motor
(D1)x2
Ø 2.6 x 5mm
Figure 15-4
Record/
Playback
Head
(Right)
Pinch
Roller
Pawl
Pull
<A>
Pull
<B>
Motor