Siemens VS08 Series Instructions For Use Manual page 35

Content:
- 4 dust bags with fasteners
- 1 micro-hygiene filter
We therefore recommend that you only use our origi-
nal dust bags.
Your appliance is a highly efficient vacuum cleaner
that achieves excellent cleaning results when used
with high-quality dust bags.
Only by using high-quality dust bags (such as Sie-
mens original dust bags) can you ensure that your
vacuum cleaner is working at the energy efficiency
class, dust pick-up rate and dust retention capacity
listed on its EU energy label.
The use of inferior-quality dust bags (e.g. paper
bags) can have a negative effect on the service life
and performance of your appliance.
Using unsuitable or inferior-quality dust bags can
also damage your vacuum cleaner. Such damage is
not covered by our guarantee.
You can find more information about this at
www.siemens-home.com/dust-bag.
You can order our original vacuum cleaner bags
here.
B Textile filter (long-term filter) VZ10TFP
Reusable bag with Velcro (R) fastener.
!
Caution: avoid a combination of textile dust bag
and HEPA filter because this considerably reduces
the service life of the HEPA filter.
C HEPA filter (class H12) VZ151HF
Recommended for allergy sufferers. Ensures very
clean exhaust air.
Replace once a year
!
Caution: avoid a combination of textile dust bag
and HEPA filter because this considerably reduces
the service life of the HEPA filter.
D Bionic filter / AirFresh System VZ11BF
Additional filter for reducing unpleasant odours
Please replace the filter once it begins to lose its
effect (after approx. 1 year)
Reference number: 468637
E TURBO-UNIVERSAL®- floor brush VZ102TBB
Simultaneously brush and vacuum shortpile carpets
and fitted carpets or any kind of covers. Particular-
ly suitable for vacuuming animal hair and fur. The
brush roller is driven by the suction force of the va-
cuum cleaner.
No electrical connection required.
F Hard floor nozzle VZ123HD
To vacuum smooth flooring (parquet, tiles, terracot-
ta...).
G Microsan exhaust filter (1) and motor protection
filter (2)
Microsan exhaust filter (1): product code 483332
Motor protection filter (2): product code 187622
Starting up
1
Fig.
a) Insert the flexible hose adapter into the air intake
opening and allow it to engage.
b) To remove the flexible hose, press the two lugs to-
gether and pull the tube out.
2
Fig.
Push the handle straight into the telescopic tube un-
til it engages.
To release the connection, squeeze the collar sleeve
and pull the handle out.
3
Fig.
Push the telescopic tube straight into the connec-
ting piece of the floor tool until it engages.
To release the connection, squeeze the locking col-
lar and pull the telescopic tube out.
4
Fig.
Press the adjusting sleeve in the direction of the
arrow and adjust the telescopic tube to the length
required.
5
Fig.
Fasten the accessory holder to the suction pipe and
insert the combination tool from above.
6
Fig.
Holding the power cord by the plug, pull out the re-
quired length and plug the plug into the mains so-
cket.
7
Fig.
To switch your vacuum cleaner on and off, press the
On/Off button in the direction of the arrow.
Vacuuming
You have bought an extremely powerful device. The high-
est suction setting is therefore only recommended for
heavily soiled, short-pile carpets and hard floors.
8
Fig.
The required suction power can be selected by adjusting
the suction regulator.
Low suction range:
For vacuuming delicate fabrics, e.g. curtains.
Moderate suction range:
For daily vacuuming of lightly soiled floors.
High suction range:
For vacuuming durable floor coverings, hard floors
and for heavily soiled surfaces.
Turbo range:
For vacuuming stubborn dirt and very heavily soiled
surfaces.
* Depending on model
33