Floating Point Dsp; Typical System Application - TiGHT AV DSP-AEC-1010-DA Manual

1.5 Floating Point DSP

The signal processing is done in an Analog Devices SHARC DSP, enabling 32-bit and 40-bit floating-point processing. Floating-
point processing provides advantages for the users in terms of sound quality and usability.
With floating point processing the internal calculations of the DSP will have higher dynamic range and avoid rounding errors that
can be a cause of noise.

1.6 Typical System Application

Meeting Room System: Tabletop or ceiling microphones, with local output to amplifier and
speakers. Wireless microphones via Dante, audio over Ethernet.
The output signal can also transmit to a recording device with Dante interface e.g., a computer
with Dante virtual soundcard. Volume control and preset recall can be done from a wall panel
controller.
Dante Application: Dante enables easy integration of compatible devices over a network. Possible sources and destinations
include microphones, mixers, music players and amplifiers, recorders and streaming devices.
Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB
-6-