TiGHT AV DSP-AEC-1010-DA User Manual
  1. Manuals
  2. Brands
  3. TiGHT AV Manuals
  4. Signal Processors
  5. DSP-AEC-1010-DA
  6. User manual

TiGHT AV DSP-AEC-1010-DA User Manual

Audio dsp with aec 4-in/4-out analog, 4-in/4-out dante and usb
Hide thumbs Also See for DSP-AEC-1010-DA:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
DSP-AEC-1010-DA
Audio DSP with AEC
4-in/4-out analog, 4-in/4-out Dante and USB
All Rights Reserved
Version: DSP-AEC-1010-DA_2022V1.2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSP-AEC-1010-DA and is the answer not in the manual?

Questions and answers

Related Manuals for TiGHT AV DSP-AEC-1010-DA

Summary of Contents for TiGHT AV DSP-AEC-1010-DA

  • Page 1 User Manual DSP-AEC-1010-DA Audio DSP with AEC 4-in/4-out analog, 4-in/4-out Dante and USB All Rights Reserved Version: DSP-AEC-1010-DA_2022V1.2...

  • Page 2: Table Of Contents

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Table of Contents Quick Start Guide ............................ 3 Hardware ..............................4 Safety Instructions ..........................4 Mechanical Data ..........................5 FCC Statement ............................. 5 Product Introduction ..........................6 Features ............................... 6 Package List ............................
  • Page 3 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Selecting Channels ......................... 19 Set Channel Name ......................... 19 Set Channel Gain ........................... 19 Link Button ............................ 19 Setting Minimum and Maximum Gain ..................19 Accessing Parameters ........................19 Module Tabs ............................20 Inputs / Outputs ..........................

  • Page 4: Quick Start Guide

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Appendix B: Module Parameters ......................33 Appendix C, Command Structure Examples ..................39 V1 examples ............................39 SET examples ..........................39 GET examples ..........................40 PRESET example ..........................41 V2 examples ............................42 SET example: ..........................

  • Page 5: Hardware

     the product power cord matches the electrical outlet used to supply power to the TiGHT AV product. Use the power adapter and power connection cables designed for this unit. Power Cord: Make sure the power cord is routed so that it will not be walked on or ...

  • Page 6: Mechanical Data

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Mechanical Data Space required: 1U (W x D x H: 215 x 162 x 44mm). At least 70mm should be reserved for the connections on the rear panel. Reserved depth depends on the wire used and the connection mode.

  • Page 7: Product Introduction

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Product Introduction Thanks for choosing the TiGHT AV DSP-AEC-1010-DA. The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB interface for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI.

  • Page 8: Front Panel Features

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Front Panel Features 1. Status LED – A green LED indicates network connection on the Local Area Network. 2. Power LED – A green LED indicates the unit is receiving power. 3.
  • Page 9 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB *used with “jumper” when using unbalanced 4. Analog Outputs – Balanced or Unbalanced outputs. 24bit DA Conversion. Signal Label Pin 2 Pin 3 Ring Pin 1 Sleeve *do not use (-) for unbalanced 5.

  • Page 10: Signal Flow Chart

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Signal Flow Chart...

  • Page 11: Software

    Refer to Audinate minimum requirements recommendations Software Installation Download software from the DSP-AEC-1010-DA product page at https://www.TiGHTAV.com/. Or open a web browser and type in the IP address of the DSP´s control interface and download the software stored on the device.

  • Page 12: File Menu

    DSP-AEC-1010-DA. Settings For the Device Settings Menu to be accessible the software and DSP-AEC-1010-DA must be connected. Device Settings Device Name: Changes the name of the device and the name it will display anywhere the device is addressed.

  • Page 13: Group Settings

    Enable Model Selection Box: When enabled, upon starting the software the model selection window will appear. UDP Control Port: Sets the UDP control port for remote communication with the DSP-AEC-1010-DA. OK: All settings done in the Device Setting window are saved to the device and the window will close.

  • Page 14: Preset Name

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB The relationship between groups and link: The channel participating in a group will not participate in LINK, which means group’s priority is higher than LINK. The difference between groups and LINK is that groups can only control channel gain and mute, while LINK includes all parameters in the channel.
  • Page 15 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Offline device: Panels can be configured offline for later upload on-site. Drag offline device from the sidebar to panel design area and double click to edit it. Note the small circle on both panel and device. Click the circle and draw a line between the units to establish the connection between panel and the DSP device to be controlled.

  • Page 16: User Interface

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB 1. Display panel name and IP address on main interface and turn the knob left or right to select function. 2. Press the button on the knob, and the second row on menu interface starts to flash which indicates edit mode.
  • Page 17 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB New Page – Opens up a new empty design page. Save – Saves the user´s current design. Open – Allows the user to open a previously created panel design. Template – Allows the user to choose from specific templates based on common hand-held devices. Sync –...

  • Page 18: Help Menu

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB string can be added. Every command is available by using the ”Central Control Command” option in the ”Help Menu”. For more information and details of the User Interface, please watch the User Interface tutorial video series on www.TiGHTAV.com or the TiGHTAV Youtube Channel.

  • Page 19: Preset Settings

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Connect / Disconnect: When the DSP-AEC-1010-DA is on the same network as your computer running the software the button will be available. Click on the button to connect to your device.

  • Page 20: Selecting Channels

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Selecting Channels Click on the channel label, fader or number. This will select the active channel, the channel will get a teal border around the fader to indicate it is now selected. Set Channel Name Channel names can be set by double clicking the name plate of the channel above the fader.

  • Page 21: Module Tabs

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Module Tabs There are multiple Module Tabs showing on the interface. These are Home, Inputs, Automixer, AEC, ANS, Matrix, Outputs, Meters. Inputs / Outputs The input /outputs tabs displays the fader section across the bottom.

  • Page 22: Aec

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Fader/Gain: Adjusts the channel gain. Channel gain is after the input to the AutoMix engine. Channel level can still affect the gain adjustment of other channels even if the fader is all the way down. Priority: Adjusts the level of priority for the selected channel.

  • Page 23: Matrix

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Matrix The Matrix tab allows you to route inputs and modules to outputs on the device. When clicking on an intersection, the box will turn into a teal color indicating that those two channels are now connected. By right clicking on the teal intersection a small fader will appear.

  • Page 24: Channel Modules

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Channel Modules The DSP-AEC-1010-DA software is designed to be flexible and includes a wide range of modules, each providing a unique function. Input Source The Input Source module is a fixed module on every input channel.

  • Page 25: Agc

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Automatic Gain Control maintains the dynamic range while automatically adjusting the audio signal level. The goal of an AGC is to normalize the signal level while maintaining dynamic range. When configured correctly, a silent speaking person will sound the same as a loud speaking person without...

  • Page 26: Adaptive Feedback Suppression

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Adaptive Feedback Suppression The Feedback Suppression is a module on each input channel. The module detects fundamentals in the audio signal that causes feedback and adds notch filters to respected parts of the signal that causes feedback.

  • Page 27: Usb Soundcard

    Use the Dante Controller software for routing and configuration of the Dante inputs and outputs. The TiGHT AV DSP can interface with other Dante devices operating at 48kHz sampling frequency. Click the crosspoint between transmitting and receiving device to establish a subscription of the audio stream on the network.

  • Page 28: V1 Protocol

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB protocol. In the V1 and V2 protocols, the fourth byte is used to distinguish between versions. 0x00- indicates V1 version (previous version) and 0x01- indicates V2 version (current protocol version). The difference between V1 and V2 is that V1 may control all processing module parameters, but one command can only control one parameter.

  • Page 29: V2 Protocol

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB V2 Protocol: Structure Byte 1 Byte 2 Byte 3 Byte 4 Byte 5~72 Fixed Fixed 0xB3 Message Type: 0xAB Version No: Data V1 = 0x00 V2 = 0x01 Byte 1 - Start of command: 0xB3 Byte 2 - Message types: There are various message types including: 0x21: SET.

  • Page 30: Preset Structure (V1 And V2 Protocol)

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Preset Structure (V1 and V2 protocol) Byte 1 Byte 2 Byte 3 Byte 4 Byte 5~12 Fixed Fixed 0xB3 Message Type: 0xAB Version No: Preset No 0-15 PRESET = 0x13 V1 = 0x00 V2 = 0x01 UDP to RS232/RS485 (V2 protocol only)

  • Page 31: Rs232/Rs485 To Udp (V2 Protocol Only)

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB RS232/RS485 to UDP (V2 protocol only) DSP devices support RS232 translating into UDP. The protocol formats are as follows. Byte 1 Byte 2 Byte 3 Byte 4 Byte 5~128 Fixed Fixed 0xB3 Message Type:...

  • Page 32: Central Control Replies Control On/Off (V2 Protocol Only)

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Central Control Replies control ON/OFF (V2 protocol only): Byte 1 Byte 2 Byte 3 Byte 4 Byte 5~9 Fixed Fixed 0xB3 Message Type: 0xAB Version No: Data Other = 0x74 V2 = 0x01 Byte 5 Byte 6...

  • Page 33: Appendix A: Module Id

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Appendix A: Module ID Module: Input source Input Channel 1-32 Expander 1~32 Input Channel 1-32 Compressor 33~64 Input Channel 1-32 Auto Gain Compensation (AGC) 65~95 Input Channel 1-32 Equalizer 97~128 Input Channel 1-32 Feedback Inhibition 129~160 AutoMixer...

  • Page 34: Appendix B: Module Parameters

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Appendix B: Module Parameters Module: Parameter Description Parameter 1 Parameter 2 Type (Value) (Value) Input channel 1 ~ 8 (-)72dB to 12dB in Input Gain => Values: 0 ~ 7 steps of 0,01dB =>...
  • Page 35 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Child Segment 8 Bands => Values: 0 ON = 0 Switch OFF=1 8 Bands => Values: 0 20Hz to 20 000Hz in Frequency steps of 1Hz => Values 20 ~ 20 000 8 Bands =>...
  • Page 36 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB 1ms to 500ms in Attack Time (ms) steps of 1ms => Values 1 ~ 500 1ms to 10 000ms in Release Time (ms) steps of 1ms => Values 1 ~ 10 000 Compressor ON = 0 Compressor...
  • Page 37 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB ON = 1OFF= 0 0x11 Low Pass Switch Bessel = 0 0x12 Low Pass Type Butterworth = 1 Likwitz-Riley = 2 Values: 6, 12, 18, 24, 0x13 Low Pass Slope 30, 36, 42 and 48 20Hz to 20 000Hz in steps of 1Hz =>...
  • Page 38 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Freq 1 ~ 8 => Values: (-)24dB to 0dB in Feedback Point 0 ~ 7 steps of 0,01dB => Gain (dB) Values: -2400 ~ 0 1/5 Octave = 20 Octave Value 1/10 Octave = 10 Freq 1 ~ 8 =>...
  • Page 39 Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB 15dB = 2 18dB = 3 Channel Values: 0 ~ ON = 1 ANS Channel Channel OFF=0 ON = 1 OFF=0 System Control System Mute ON = 0 Limiter Limiter Switch OFF=1 (-)48dB to 0dB in Limiter Threshold...

  • Page 40: Appendix C, Command Structure Examples

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Appendix C, Command Structure Examples V1 examples SET examples 1. Set input Gain to -3dB for input 4. Structure Command Comments Byte 1 : Fixed start B3 Fixed Byte 2: Message type: SET= 21, GET =22 and PRESET =13 Byte 3: Fixed to AB Fixed...

  • Page 41: Get Examples

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB 3. Set AEC Switch 1 to ON Structure Command Comments Byte 1 : Fixed start B3 Fixed Byte 2: Message type: SET= 21, GET =22 and PRESET Byte 3: Fixed to AB Fixed Byte 4: Version number: V1 = 01 and V2 =02.

  • Page 42: Preset Example

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB 2. Get Mute status for output 5 Structure Command Comments Byte 1 : Fixed start B3 Fixed Byte 2: Message type: SET= 21, GET =22 and PRESET Byte 3: Fixed to AB Fixed Byte 4: Version number: V1 = 01 and V2 =02.

  • Page 43: V2 Examples

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB V2 examples SET example: 1. SET Input Mute CH1-CH4 Structure Command Comments Byte 1 : Fixed start B3 Fixed Byte 2: Message type: SET= 21, GET =22 and PRESET Byte 3: Fixed to AB (any will actually do but we set it to AB) Fixed Byte 4: Version number: V1 = 01 and V2 =02.

  • Page 44: Rs232 To Udp Example

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB RS232 to UDP example: 1. Send command “HELLO DSP” to 192.168.40.159 on UDP port 50 000. Structure Command Comments Byte 1 : Fixed start B3 Fixed Byte 2: Message type: SET= 21, GET =22 and PRESET =13 Other controls Byte 3: Fixed to AB (any will actually do but we set...

  • Page 45: Customer Service

    Audio DSP with AEC, 4-in/4-out analog, 4-in/4-out Dante and USB Customer Service The return of a product to our Customer Service implies the full agreement of the terms and conditions hereinafter. There terms and conditions may be changed without prior notice. 1) Warranty We provide limited warranty for the product within five years counting from date of purchase (The purchase invoice shall prevail).

Table of Contents