Table of Contents
Advertisement
Introduction Foreword:
Thank you that you have chosen the G-Systems Engineering Ltd 16A fan controller
product.
The 16A fan controller is a climate controller which can measure the air temperature
humidity and water temperature. The controller integrates several measurements
simultaneously and continuously controls devices such as intake- and exhaust fans and 2
switched channels can be individually and user definied programmed on / off. The 16A fan
controller controls based on the measurement data all functions, depending on the model
saves all setpoints and actual values to an external USB memory stick in a .csv format
(comma-separated values). These values can be evaluated on a computer at a later time,
or with the free of charge GSE Growthanalizer software.
Technical specifications:
Operating voltage: 230V / 50Hz
Depending on the country the maximum power rating of the power-cord is variable:
VDE L typ max: 16A, Schuko
VDE F type max: 16A, France
VDE E type max:13A, Switzerland
VDE U type max 13A, England
Loading of the individual outputs:
Intake fan max:
Exhaust fan max : 10A 2300W cos 1
Exit 1 max:
Exit 2 max:
The sum of all the currents can not exceed prescribed maximum current of the country
socket!
Assembly:
Mount the 16A fan controller with the included mounting bracket to a non-flammable
surface such as brick concrete and never on wood, plastic carboard, etc. Make sure that
on your choice of the place have sufficient ventilation in the location and the heat can be
dissipated. Avoid small unventilated rooms or cabinets. Improper installation will result a
overheating of the controller!
Operation of the keypad:
The controller is operated by four menu keys.
With the arrow keys UP and DOWN the various menu lines can be selected. Press
10A 2300W cos 1
10A 2300W cos 1
10A 2300W cos 1
page 2 of 15
Advertisement
Table of Contents
