Two-Port Fiber-Optic Gigabit Ethernet Network Interface Card; Fiber-Optic Gigabit Ethernet Nic Features - Nokia EM7500 Installation Manual

5
Connecting PMC Network Interface Cards
To connect the appliance to other network components, you can order
appropriate adapter cables separately from a cable vendor of your choice.
Two-Port Fiber-Optic Gigabit Ethernet Network
Interface Card
All NICs installed in an appliance is installed into slots on the appliance.
Ethernet NICs can occupy any of the slots or subslots in an appliance that
other I/O cards do not occupy.

Fiber-Optic Gigabit Ethernet NIC Features

The two-port fiber-optic Gigabit Ethernet NIC provides the following
features:
Supports traffic at 1000 Mbps
High bandwidth
Full-duplex mode operation up to 1 Gbps (no half-duplex support)
Link speed auto advertising
Packet tracing for analysis through tcpdump
Compliance with IEEE 802.3z Gigabit Ethernet specification
You can configure and monitor Ethernet interfaces with Nokia Network
Voyager, the Web-based element management interface to Nokia IP
appliances. Specifically, you set the port speed and full-duplex mode with
Network Voyager.
Figure 17
Ethernet NIC you use in the appliance.
68
All manuals and user guides at all-guides.com
shows the front panel details for the two-port fiber-optic Gigabit
IP390, 105i & 105s Security Platform Installation Guide