Download Print this page

Kramer RK-19N Installation Instructions

Under-the-table brackets

Installation Instructions

MODEL:

RK-19N

Under-the-table Brackets

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where

updates to this user manual may be found.

We welcome your questions, comments, and feedback.

www.kramerAV.com

info@kramerel.com

2900- 300563

P/N:

Rev:

Table of Contents

Need help?

Do you have a question about the RK-19N and is the answer not in the manual?

Page 1 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback.
Page 2 Attach the RK-19N brackets to the sides of the Kramer machine  Fix the RK-19N with the machine under the table Attaching the Brackets You can attach the RK-19N brackets to all types of Kramer 19” 1U Kramer machines, as follows: 1U Device Screw Location Device Position Size/Type 1/2-19"...
Page 3 1U Device Screw Location Device Position Size/Type 1/3-19" 1U (extrusion) 1/4-19" 1U (extrusion) 1/4-19" 1U (extrusion) long 1U 19” Machine Size/Type Device Position and Screws 19-inch (W), 7-inch (D) 1U (H)/Aluminum (four screws on each size - marked red)
Page 4 19-inch (W), 9-inch (D) 1U (H)/Metal Two screws on each size - marked red) Attaching the RK-19N under the Table Place the unit to the underside of the table and mark the correct location. Insert the six 4x16 wood...