Troubleshooting Guide - Sharper Image WS0832 User Manual

2. Replace the wind, rain and thermo-hygrometer transmitter batteries once every 1-2 years
12.

Troubleshooting Guide.

Problem
Wireless remote not reporting in to
console.
There are dashes (--.-) on the display
console.
Figure 52
Solution
If any of the sensor communication is lost, dashes (--.-)
will be displayed on the screen. To reacquire the signal,
press and hold the CHANNEL/+ button for 3 seconds,
and the remote search icon
displayed. Once the signal is reacquired, the remote
search icon
be displayed.
The maximum line of sight communication range is 100
m and 30 m under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less than 1.5m), move
the sensor assembly away from the display console.
Make sure the remote sensor LCD display is working and
the transmitter light is flashing once per 60 seconds.
Install a fresh set of batteries in the remote thermo-
hygrometer. For cold weather environments, install
lithium batteries.
Make sure the remote sensors are not transmitting
through solid metal (acts as an RF shield), or earth barrier
(down a hill).
Move the display console around electrical noise
generating devices, such as computers, TVs and other
wireless transmitters or receivers.
Move the remote sensor to a higher location. Move the
remote sensor to a closer location.
23
will be constantly
will turn off, and the current values will