Set (Program) Mode - Sharper Image WS0832 User Manual

1.Time, Date and Year. Press the CHANNEL/+ or MIN/MAX/- key to toggle between
time, date and year.
2.Indoor Temperature. Press the CHANNEL/+ or MIN/MAX/- key to toggle between
out/indoor for temperature and humidity alarm on/off view
3.Rainfall. Press the CHANNEL/+ or MIN/MAX/- key to toggle between rate, 24h,
week, month and total.
To clear the total rain, press the CHANNEL/+ or MIN/MAX/- button until total rain is
displayed. The total rain will flash. Press and hold the SET button for five seconds until
total rain reads 0.0.
4. Dew Point. Press the CHANNEL/+ or MIN/MAX/- key to toggle between outdoor AT
（Apparent Temperature) and dew point.
5.Wind Average. Press the CHANNEL/+ or MIN/MAX/- key to toggle between
current,2mins and 10 minutes.

7.2 Set (Program) Mode

While in Normal Mode, press and hold the SET key for at least three seconds to enter the
Set Mode. The first setting will begin flashing. You can press the SET key again to skip
any step, as defined below.
Note: In the Set mode, press the [+] key or [-] key to change or scroll the value. Hold
the [+] key or [-] key for three seconds to increase/decrease rapidly.
Note: To exit the Set mode at any time, press the SNOOZE button of the display
console.
1. 12/24 Hour Format (default: 24h):.Press the SET key again to adjust the 12/24 hour
format setting (FMT). Press the [+] key or [-] key to change between 12 hour and 24
hour format.
2. Change Hour. press the SET key again to set the hour. Press the [+] key or [-]key to
adjust the hour up or down. Note the PM icon is present during afternoon hours.
3. Change Minute. Press the SET key again to set the minute. Press the [+] key or [-] key
to adjust the minute up or down.
4. Date Format (default: DATE): Press the SET key again to enter the day/month
format mode. Press the [+] key to switch between MM-DD, DD-MM.
5. Change Month. Press the SET key again to set the calendar month. Press the [+] key
or [-] key to adjust the calendar month.
6. Change Day. Press the SET key again to set the calendar day. Press the [+] key or [-]
key to adjust the calendar day.
7. Change Year. Press the SET key again to set the calendar year. Press the [+] key or [-
] key to adjust the calendar year.
8. Max/Min Clearing (default: ON). Press the SET key again to set the max/min
clearing mode (CLEARS). The Max/Min can be programmed to clear daily (at
midnight) or manually. Press the [+] key or [-] key to switch between "Clears 24h" and
Clears Manually.
9. Temperature Units of Measure (default: °C):. Press the SET key again to change the
temperature units of measure (the UNITSET icon will be displayed). Press the [+] key
or [-] key to switch between °F and °C units of measure.
10. Wind Speed Units of Measure (default: m/s). Press the SET key again to change the
wind speed units of measure . Press the [+] key or [-] key to toggle the wind speed units
between m/s,ft/s, bft, knots, mph or km/h.
11. Rainfall Units of Measure (default: mm). Press the SET key again to change the
Rainfall units of measure. Press[+] key or [-] key to toggle the rainfall units between
mm and inch.
15