Back Light Mode; Alarm Mode; Alarm Operation; Viewing The High And Low Alarms - Sharper Image WS0832 User Manual

five minute. press any key (MIN/MAX/+ ,SET, ALARM,CHANNEL/+) to permanently
exit the Snooze mode.
7.7 Back light Mode
If the LED is off, Press the SNOOZE button once. The backlight will turn on for five
seconds, and if no operation is performed for three seconds, the backlight will turn off.
The backlight operation is different when operating on batteries to save power.
ADJUSTABLE BACKLIGHT BRIGHTNESS
There are 3 levels of brightness of backlight. When the backlight is on press SNOOZE key
to switch between the 3 levels.
When backlight is off, press and hold the SNOOZE key for two seconds, the backlight will
turn on permanently
To turn off the backlight at any time press and hold the SNOOZE key for two seconds, the
backlight will turn off (visible after 10 seconds).
Note: If plugged into AC power, the backlight will remain on. It is not recommended
leaving the backlight on for a long period of time when operating on batteries only, or the
batteries will run down quickly.

8.Alarm Mode

The WS0832 includes the following alarms:
•
Time
• Out Temperature
• Out Humidity
• Out AT(Apparent Temperature)
• Out Dew Point
• Out Feels Like Temperature
• Wind Gust
• Wind Average
• Rate Rainfall
• 24 Hour Rainfall
• Indoor Temperature
• Indoor Humidity

8.1 Alarm Operation

When an alarm condition is exceeded, the alarm icon will flash
beeper will sound (audible). To silence the beeper, press any key.
8.2 Viewing the High and Low Alarms
To view the current alarm settings, press the ALARM key to enter the alarm mode.
ALARM will be displayed in the time area. At the same time Alarm time parameters of
out/indoor temperature/humidity, rain rate, AT, feels like, wind gust, wind average, and
dew point are displayed.
17
(visual) and the alarm