unGer Hydro Power Ultra Quick Start Manual

DANGER
!
Contents under pressure can cause severe injury or
• Spilled resin is a slipping hazard. Clean up spilled
death from tank rupture.
• Resin can cause skin irritation.
When starting system:
• Avoid skin contact.
• Do not exceed pressure of 116 psi (8 Bar).
• Wash hands thoroughly after use.
• Check system for cracks.
• Can cause eye irritation. Avoid eye contact.
• Be sure cover is in locked position.
• Keep Water OUT connection open and hold yellow lever
down to remove trapped air from system.
• For use only with drinking (tap) water.
• Do not drink the water produced by this system.
Before servicing system:
• Shut off tap water supply and open Water OUT connection.
• Disconnect water supply and allow tank to drain.
• Before opening tank, Press yellow FastLock™ opening
lever to remove pressure the tank, rotate handles counter-
clockwise 1/8 turn, and remove top cap using handles.
Unger Enterprises, LLC
425 Asylum Street • Bridgeport, CT 06610
Tel.: 800 431 2324 • Fax: 800 367 1988
unger@ungerglobal.com
Lit. # 21496
4
At Unger, we aim to stand apart from the
rest thanks to our special "Yes We Can!"
service spirit. We love what we do and
as proof of that, we promise to deliver a
100% Customer Satisfaction Guarantee
on every product and service we offer.
STORAGE: Do not store resin in
open or unlabeled containers. Store
in a cool, dry place (15°F to 100°F).
resin immediately.
DISPOSAL: Dispose of in
accordance with applicable
federal, state/provincial, and local
regulations. All HydroPower Ultra
units require the use of mixed bed
Wear safety goggles. In case of eye contact,
ion exchange resin (commonly
immediately flush eyes thoroughly with clean
referred to as de-ionizing resin)
water. Consult doctor if symptoms persist.
READ OPERATING INSTRUCTIONS BEFORE
USING PRODUCT!
www.ungerglobal.com www.ungerglobal.com 1